https://wiki.fogproject.org/wiki/api.php?action=feedcontributions&feedformat=atom&user=Gilou 2026-04-24T17:51:57Z User contributions MediaWiki 1.30.0 https://wiki.fogproject.org/wiki/index.php?title=Organizations&diff=9332 2015-02-05T17:29:04Z

<p>Gilou: </p> <hr /> <div>= Burlington School District =<br /> [[File:bsd.png]]<br /> == Year started using ==<br /> 2010<br /> == Location ==<br /> Burlington, VT - USA<br /> == Approximate number of systems ==<br /> 2300<br /> <br /> = Catholic Central High School =<br /> [[File:cchs.gif]]<br /> == Year started using ==<br /> 2012<br /> == Location ==<br /> Burlington, WI - USA<br /> == Approximate number of systems ==<br /> 200<br /> = Southwest University =<br /> [[File:swu.jpeg]]<br /> == Year started using ==<br /> 2011<br /> == Location ==<br /> Blagoevgrad, Bulgaria<br /> == Approximate number of systems ==<br /> 1000<br /> = IUT-Amiens TC and GEA departements =<br /> [[File:iut.gif]]<br /> == Year started using ==<br /> 2010<br /> == Location ==<br /> Amiens, France<br /> == Approximate number of systems ==<br /> 120<br /> = Seymour Community School Corporation =<br /> [[File:scsc.jpeg]]<br /> == Year started using ==<br /> 2011<br /> == Location ==<br /> Seymour, IN - USA<br /> == Approximate number of systems ==<br /> 4000<br /> = Fort Hays State University =<br /> [[File:fhsu.png]]<br /> <br /> == Year started using ==<br /> 2014<br /> == Location ==<br /> Hays, KS - USA<br /> == Approximate number of systems ==<br /> 800<br /> = Rockwood Area School District =<br /> [[File:rsdr.jpeg]]<br /> == Year started using ==<br /> 2011<br /> == Location ==<br /> Rockwood, PA - USA<br /> == Approximate number of systems ==<br /> 800<br /> = Weslaco Independent School District =<br /> [[File:wisd.png]]<br /> == Year started using ==<br /> 2009<br /> == Location ==<br /> Weslaco, TX - USA<br /> == Approximate number of systems ==<br /> 9000<br /> <br /> = Groupe ESEO =<br /> [[File:eseo.png]]<br /> == Year started using ==<br /> 2014<br /> == Location ==<br /> Angers, France&lt;br/&gt;<br /> Paris, France&lt;br/&gt;<br /> Dijon, France&lt;br/&gt;<br /> Shanghai, China<br /> <br /> == Approximate number of systems ==<br /> 800<br /> <br /> = Prisma College =<br /> [[File:prisma.jpeg]]<br /> == Year started using ==<br /> 2010<br /> == Location ==<br /> Amersfoort, Netherlands<br /> == Approximate number of systems ==<br /> 550<br /> = Universidad del País Vasco / Euskal Herriko Unibertsitatea =<br /> [[File:UPV_EHU.jpeg]]<br /> == Year started using ==<br /> 2010<br /> == Location ==<br /> Basque Country , Spain<br /> == Approximate number of systems ==<br /> 7000<br /> = Cochrane Supply =<br /> [[File:Cochrane.png]]<br /> == Year started using ==<br /> 2015<br /> == Location ==<br /> Madison Heights, MI - USA<br /> == Approximate number of systems ==<br /> 150<br /> = Dawan =<br /> [[File:dawan.png]]<br /> == Year started using ==<br /> 2012<br /> == Location ==<br /> Nantes, Paris, Lyon, Lille, Toulouse, Strasbourg - France<br /> == Approximate number of systems ==<br /> 150</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=File:Dawan.png&diff=9331 2015-02-05T17:28:26Z

<p>Gilou: </p> <hr /> <div></div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Credits&diff=8856 2014-12-13T16:32:22Z

<p>Gilou: /* Gilles Pietri */</p> <hr /> <div>== FOG Project Leads (Creators and Developers too) ==<br /> === Chuck Syperski ===<br /> Chuck Syperski is the lead developer for FOG computer imaging solution. He is a software developer and network integration specialist for a public school district outside of Chicago, IL. Chuck Syperski has a Bachelor of Science in Computer Science from the University of Illinois and is half way done with his master's degree :). He specializes in Java, jsp, jsf, objective C, C, C++, C#, perl and php. You can contact Chuck Syperski directly via sourceforge as the following link:<br /> <br /> http://sourceforge.net/users/microleaks/<br /> <br /> Chuck Syperski releases other software titles through his company [http://cwssoft.com CWS Software LLC]<br /> <br /> His username on the FOG forums is Chuck Syperski<br /> <br /> === Jian Zhang ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is Jian Zhang<br /> <br /> == Community Managers ==<br /> === Chad-bsid ===<br /> <br /> No Content<br /> <br /> === falko ===<br /> <br /> No Content<br /> <br /> === andyroo54 ===<br /> <br /> No Content<br /> <br /> === BryceZ ===<br /> <br /> No Content<br /> <br /> === Kevin ===<br /> <br /> No Content<br /> <br /> == FOG Developers ==<br /> === Jaymes Driver ===<br /> <br /> *Jaymes &quot;loves dnsmasq&quot; Driver<br /> <br /> Jaymes is an aspiring software engineer and Ubuntu nut. He began working on his degree at University of Advancing Technology in Tempe, AZ but currently works as a Technology Support Specialist for Seymour Community School Corporation out of Seymour, IN. Jaymes spends his time breaking what isn't broken, and working on private projects that deal in html, php, and mysql. You can contact Jaymes by using the FOG forums.<br /> <br /> His username on the FOG forums is Jaymes Driver<br /> <br /> === Tom Elliott ===<br /> <br /> *Senior Developer<br /> <br /> Tom Elliott is the Senior Developer for FOG computer imaging solution. He is a technical support specialist for Burlington School District in Burlington, VT. Tom Elliott has a Bachelor of Science in Information Technology (BSIT) Information Systems Security from the University of Phoenix. Currently looking at Master's programs. He also served 8 years active duty service with the United States Army as a Signal Support Systems Specialist. You can contact him directly via email at tommygunsster@gmail.com, thomas@mastacontrola.com, or on the FOG Forums.<br /> <br /> His username on the FOG forums is Tom Elliott<br /> <br /> === Fernando Gietz ===<br /> <br /> *LDAP Plugin Creator<br /> <br /> No Content<br /> <br /> His username on the FOG forums is Fernando Geitz<br /> <br /> === Peter Gilchrist ===<br /> <br /> No Content<br /> <br /> === Greg Grammon ===<br /> <br /> Greg Grammon a PC Support Technician for Fort Hays State University in Hays, KS. Greg Grammon has a Bachelor of Science in Information Networking and Telecommunications from Fort Hays State University. <br /> <br /> His username on the FOG forums is Junkhacker.<br /> <br /> === Curtis Larsen ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is fractal13<br /> <br /> === Gilles Pietri ===<br /> <br /> Gilles helps developping FOG (Web UI, and linux client code) and provides insights on how to drive the project. He is specialized in IT administration and virtualization, and provides training and consulting for FOG through a training center in France (in Paris, Nantes, Lille, Lyon, Toulouse...). You can find DAWAN's training offer here: http://www.dawan.fr/formations/reseaux/deploiement/fog--deploiement-d-images-initiation-approfondissement<br /> <br /> His username on the FOG forums is Gilou<br /> <br /> === Lee Rowlett ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is Lee Rowlett<br /> <br /> === Joseph Schmitt ===<br /> <br /> *Lead developer of the Client.<br /> <br /> Joseph Schmitt is currently working towards a degree in Computer Engineering. You can contact him directly via email at contact@jbob.io or on the forums.<br /> <br /> His username on the FOG forums is Jbob<br /> <br /> === John Shaw ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is jbsclm<br /> <br /> === Travis Vlaminck ===<br /> <br /> Travis works for a public school district as a computer support specialist. Most of his contributions to the FOG project are related to feature integration and coding on the web UI.<br /> <br /> His username on the FOG forums is BPSTravis<br /> <br /> == Notorious Beta Testers ==<br /> === Andy Abplanalp ===<br /> <br /> No Content<br /> <br /> His name on the FOG forums is Andy Abplanalp<br /> <br /> === Ian Allison ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is ianabc<br /> <br /> === Lane Garland ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is need2<br /> <br /> === Greg Plamondon ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is Greg Plamondon<br /> <br /> === Dan Younkin ===<br /> <br /> Dan works for a public school district in Rockwood, PA, USA as a Technology Assistant. His titles include too many to count and if he takes a day off there are mass panics. Most of his contributions are testing new features, mass troubleshooting and confirming bugs, wiki updates, and suggesting more a simpler streamline FOG. It is his hope FOG will expand and compete with other streamline imaging software and systems.<br /> <br /> <br /> His username on the FOG forums is Wolfbane8653</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Credits&diff=8855 2014-12-13T16:31:57Z

<p>Gilou: /* Gilles Pietri */</p> <hr /> <div>== FOG Project Leads (Creators and Developers too) ==<br /> === Chuck Syperski ===<br /> Chuck Syperski is the lead developer for FOG computer imaging solution. He is a software developer and network integration specialist for a public school district outside of Chicago, IL. Chuck Syperski has a Bachelor of Science in Computer Science from the University of Illinois and is half way done with his master's degree :). He specializes in Java, jsp, jsf, objective C, C, C++, C#, perl and php. You can contact Chuck Syperski directly via sourceforge as the following link:<br /> <br /> http://sourceforge.net/users/microleaks/<br /> <br /> Chuck Syperski releases other software titles through his company [http://cwssoft.com CWS Software LLC]<br /> <br /> His username on the FOG forums is Chuck Syperski<br /> <br /> === Jian Zhang ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is Jian Zhang<br /> <br /> == Community Managers ==<br /> === Chad-bsid ===<br /> <br /> No Content<br /> <br /> === falko ===<br /> <br /> No Content<br /> <br /> === andyroo54 ===<br /> <br /> No Content<br /> <br /> === BryceZ ===<br /> <br /> No Content<br /> <br /> === Kevin ===<br /> <br /> No Content<br /> <br /> == FOG Developers ==<br /> === Jaymes Driver ===<br /> <br /> *Jaymes &quot;loves dnsmasq&quot; Driver<br /> <br /> Jaymes is an aspiring software engineer and Ubuntu nut. He began working on his degree at University of Advancing Technology in Tempe, AZ but currently works as a Technology Support Specialist for Seymour Community School Corporation out of Seymour, IN. Jaymes spends his time breaking what isn't broken, and working on private projects that deal in html, php, and mysql. You can contact Jaymes by using the FOG forums.<br /> <br /> His username on the FOG forums is Jaymes Driver<br /> <br /> === Tom Elliott ===<br /> <br /> *Senior Developer<br /> <br /> Tom Elliott is the Senior Developer for FOG computer imaging solution. He is a technical support specialist for Burlington School District in Burlington, VT. Tom Elliott has a Bachelor of Science in Information Technology (BSIT) Information Systems Security from the University of Phoenix. Currently looking at Master's programs. He also served 8 years active duty service with the United States Army as a Signal Support Systems Specialist. You can contact him directly via email at tommygunsster@gmail.com, thomas@mastacontrola.com, or on the FOG Forums.<br /> <br /> His username on the FOG forums is Tom Elliott<br /> <br /> === Fernando Gietz ===<br /> <br /> *LDAP Plugin Creator<br /> <br /> No Content<br /> <br /> His username on the FOG forums is Fernando Geitz<br /> <br /> === Peter Gilchrist ===<br /> <br /> No Content<br /> <br /> === Greg Grammon ===<br /> <br /> Greg Grammon a PC Support Technician for Fort Hays State University in Hays, KS. Greg Grammon has a Bachelor of Science in Information Networking and Telecommunications from Fort Hays State University. <br /> <br /> His username on the FOG forums is Junkhacker.<br /> <br /> === Curtis Larsen ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is fractal13<br /> <br /> === Gilles Pietri ===<br /> <br /> Gilles helps developping FOG (Web UI, and linux client code) and providing insights on how to drive the project. He is specialized in IT administration and virtualization, and provides training and consulting for FOG through a training center in France (in Paris, Nantes, Lille, Lyon, Toulouse...). You can find DAWAN's training offer here: http://www.dawan.fr/formations/reseaux/deploiement/fog--deploiement-d-images-initiation-approfondissement<br /> <br /> His username on the FOG forums is Gilou<br /> <br /> === Lee Rowlett ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is Lee Rowlett<br /> <br /> === Joseph Schmitt ===<br /> <br /> *Lead developer of the Client.<br /> <br /> Joseph Schmitt is currently working towards a degree in Computer Engineering. You can contact him directly via email at contact@jbob.io or on the forums.<br /> <br /> His username on the FOG forums is Jbob<br /> <br /> === John Shaw ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is jbsclm<br /> <br /> === Travis Vlaminck ===<br /> <br /> Travis works for a public school district as a computer support specialist. Most of his contributions to the FOG project are related to feature integration and coding on the web UI.<br /> <br /> His username on the FOG forums is BPSTravis<br /> <br /> == Notorious Beta Testers ==<br /> === Andy Abplanalp ===<br /> <br /> No Content<br /> <br /> His name on the FOG forums is Andy Abplanalp<br /> <br /> === Ian Allison ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is ianabc<br /> <br /> === Lane Garland ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is need2<br /> <br /> === Greg Plamondon ===<br /> <br /> No Content<br /> <br /> His username on the FOG forums is Greg Plamondon<br /> <br /> === Dan Younkin ===<br /> <br /> Dan works for a public school district in Rockwood, PA, USA as a Technology Assistant. His titles include too many to count and if he takes a day off there are mass panics. Most of his contributions are testing new features, mass troubleshooting and confirming bugs, wiki updates, and suggesting more a simpler streamline FOG. It is his hope FOG will expand and compete with other streamline imaging software and systems.<br /> <br /> <br /> His username on the FOG forums is Wolfbane8653</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8443 2014-11-23T23:20:38Z

<p>Gilou: Proper SVN url..</p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Dependencies ==<br /> <br /> === Debian 7 (and Ubuntu 12.x and newer) ===<br /> <br /> sudo apt-get install build-essential subversion git bison bc flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> == Download the relevant FOG source ==<br /> svn checkout https://svn.code.sf.net/p/freeghost/code/trunk/src fogsrc<br /> <br /> == Download Buildroot ==<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> == Copy source files inside Buildroot's tree ==<br /> <br /> cp -r fogsrc/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> == build FOG file system ==<br /> # A chance to see what's inside the buildroot, and change options in a graphical UI :<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile.<br /> # Go get some coffee, this takes a long time, depending on your config.<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz ../init.xz<br /> cd ..<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8442 2014-11-23T23:04:20Z

<p>Gilou: /* build FOG file system */</p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Dependencies ==<br /> <br /> === Debian 7 (and Ubuntu 12.x and newer) ===<br /> <br /> sudo apt-get install build-essential subversion git bison bc flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> == Download the relevant FOG source ==<br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> == Download Buildroot ==<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> == Copy source files inside Buildroot's tree ==<br /> <br /> cp -r fogsrc/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> == build FOG file system ==<br /> # A chance to see what's inside the buildroot, and change options in a graphical UI :<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile.<br /> # Go get some coffee, this takes a long time, depending on your config.<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz ../init.xz<br /> cd ..<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8441 2014-11-23T23:03:50Z

<p>Gilou: /* Debian 7 (and Ubuntu 12.x and newer) */</p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Dependencies ==<br /> <br /> === Debian 7 (and Ubuntu 12.x and newer) ===<br /> <br /> sudo apt-get install build-essential subversion git bison bc flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> == Download the relevant FOG source ==<br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> == Download Buildroot ==<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> == Copy source files inside Buildroot's tree ==<br /> <br /> cp -r fogsrc/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> == build FOG file system ==<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile.<br /> # Go get some coffee, this takes a long time, depending on your config.<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz ../init.xz<br /> cd ..<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8431 2014-11-18T23:19:33Z

<p>Gilou: </p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Dependencies ==<br /> <br /> === Debian 7 (and Ubuntu 12.x and newer) ===<br /> <br /> sudo apt-get install build-essential subversion git bison flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> == Download the relevant FOG source ==<br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> == Download Buildroot ==<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> == Copy source files inside Buildroot's tree ==<br /> <br /> cp -r fogsrc/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> == build FOG file system ==<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile.<br /> # Go get some coffee, this takes a long time, depending on your config.<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz ../init.xz<br /> cd ..<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8430 2014-11-18T23:16:29Z

<p>Gilou: </p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Dependencies ==<br /> <br /> === Debian 7 ===<br /> <br /> sudo apt-get install build-essential subversion git bison flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> == Download the relevant FOG source ==<br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> == Download Buildroot ==<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> == Copy source files inside Buildroot's tree ==<br /> <br /> cp -r fogsvn/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> == build FOG file system ==<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile.<br /> # Go get some coffee, this takes a long time, depending on your config.<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz ../init.xz<br /> cd ..<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8429 2014-11-18T23:07:29Z

<p>Gilou: /* Download the relevant FOG source */</p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Debian 7 ==<br /> <br /> === Debian update ===<br /> <br /> sudo apt-get update<br /> sudo apt-get upgrade<br /> <br /> === Install the required packages for buildroot ===<br /> <br /> sudo apt-get install build-essential subversion git bison flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> === Download the relevant FOG source ===<br /> <br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> === Download Buildroot ===<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> === Copy source files inside Buildroot's tree ===<br /> <br /> cp -r fogsvn/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> === build FOG file system ===<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile.<br /> # Go get some coffee, this takes a long time, depending on your config.<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz ../init.xz<br /> cd ..<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8428 2014-11-18T23:07:01Z

<p>Gilou: /* build FOG file system */</p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Debian 7 ==<br /> <br /> === Debian update ===<br /> <br /> sudo apt-get update<br /> sudo apt-get upgrade<br /> <br /> === Install the required packages for buildroot ===<br /> <br /> sudo apt-get install build-essential subversion git bison flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> === Download the relevant FOG source ===<br /> <br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> <br /> === Download Buildroot ===<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> === Copy source files inside Buildroot's tree ===<br /> <br /> cp -r fogsvn/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> === build FOG file system ===<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile.<br /> # Go get some coffee, this takes a long time, depending on your config.<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz ../init.xz<br /> cd ..<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8427 2014-11-18T23:05:51Z

<p>Gilou: /* Copy source to Buildroot */</p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Debian 7 ==<br /> <br /> === Debian update ===<br /> <br /> sudo apt-get update<br /> sudo apt-get upgrade<br /> <br /> === Install the required packages for buildroot ===<br /> <br /> sudo apt-get install build-essential subversion git bison flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> === Download the relevant FOG source ===<br /> <br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> <br /> === Download Buildroot ===<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> === Copy source files inside Buildroot's tree ===<br /> <br /> cp -r fogsvn/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> === build FOG file system ===<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile:<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz ../init.xz<br /> cd ..<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8426 2014-11-18T23:05:14Z

<p>Gilou: /* install all essential package */</p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Debian 7 ==<br /> <br /> === Debian update ===<br /> <br /> sudo apt-get update<br /> sudo apt-get upgrade<br /> <br /> === Install the required packages for buildroot ===<br /> <br /> sudo apt-get install build-essential subversion git bison flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> === Download the relevant FOG source ===<br /> <br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> <br /> === Download Buildroot ===<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> === Copy source to Buildroot ===<br /> <br /> cp -r fogsvn/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> === build FOG file system ===<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile:<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz ../init.xz<br /> cd ..<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8425 2014-11-18T23:04:52Z

<p>Gilou: /* build FOG file system */</p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Debian 7 ==<br /> <br /> === Debian update ===<br /> <br /> sudo apt-get update<br /> sudo apt-get upgrade<br /> <br /> === install all essential package ===<br /> <br /> sudo apt-get install build-essential subversion git bison flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> <br /> === Download the relevant FOG source ===<br /> <br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> <br /> === Download Buildroot ===<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> === Copy source to Buildroot ===<br /> <br /> cp -r fogsvn/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> === build FOG file system ===<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile:<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz ../init.xz<br /> cd ..<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8424 2014-11-18T23:02:11Z

<p>Gilou: </p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Debian 7 ==<br /> <br /> === Debian update ===<br /> <br /> sudo apt-get update<br /> sudo apt-get upgrade<br /> <br /> === install all essential package ===<br /> <br /> sudo apt-get install build-essential subversion git bison flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> <br /> === Download the relevant FOG source ===<br /> <br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> <br /> === Download Buildroot ===<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> === Copy source to Buildroot ===<br /> <br /> cp -r fogsvn/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> === build FOG file system ===<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile:<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz init.xz<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou https://wiki.fogproject.org/wiki/index.php?title=Build_FOG_file_system_with_BuildRoot&diff=8423 2014-11-18T22:59:33Z

<p>Gilou: Compile the buildroot toolchain and build the filesystem image</p> <hr /> <div>In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need.<br /> This page will tell you how to build the filesystem on your own from SVN.<br /> <br /> == Debian 7 ==<br /> <br /> === Debian update ===<br /> <br /> sudo apt-get update<br /> sudo apt-get upgrade<br /> <br /> === install all essential package ===<br /> <br /> sudo apt-get install build-essential subversion libqt4-dev bison flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev<br /> <br /> <br /> === Download the relevant FOG source ===<br /> <br /> svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc<br /> <br /> <br /> === Download Buildroot ===<br /> <br /> wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2<br /> tar xjf buildroot-2014.08.tar.bz2<br /> <br /> === Copy source to Buildroot ===<br /> <br /> cp -r fogsvn/buildroot/* buildroot-2014.08/<br /> cd buildroot-2014.08<br /> mv fog.buildroot.config.32 .config # or config.64 for 64 bits<br /> <br /> === build FOG file system ===<br /> make menuconfig<br /> # This will download all the required packages from their sources, it's around 300 MB<br /> make source<br /> # All packages are now in buildroot-2014.08/dl/ So we compile:<br /> make<br /> # Here is our init.xz<br /> cp output/images/rootfs.ext2.xz init.xz<br /> <br /> copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)</div>

Gilou