WorkingDevices - Revision history

SebastianRoth: /* USB Ethernet Adapters */

2021-05-12T08:22:38Z

‎USB Ethernet Adapters

Wolfbane8653.3362: /* Devices */

2019-09-17T18:00:45Z

‎Devices

Wolfbane8653.3362: /* Devices that are known/tested to work with FOG Imaging solution. */

2019-09-17T17:54:10Z

‎Devices that are known/tested to work with FOG Imaging solution.

Aharrison: Figured out the proper way to allow network interfaces to boot first on the Lenovo M900z.

2017-05-19T19:12:34Z

Figured out the proper way to allow network interfaces to boot first on the Lenovo M900z.

Aharrison: /* Devices */ Add Lenovo M900z

2017-05-10T18:28:42Z

‎Devices: Add Lenovo M900z

Wayne-workman.28155: Changed terminology to use capture instead of upload.

2016-07-08T03:06:53Z

Changed terminology to use capture instead of upload.

SebastianRoth: /* USB Ethernet Adapters */

2016-04-15T18:25:28Z

‎USB Ethernet Adapters

SebastianRoth: /* USB Ethernet Adapters */

2016-04-15T13:45:58Z

‎USB Ethernet Adapters

Wayne-workman.28155: /* Virtual Machines */

2016-04-01T20:55:21Z

‎Virtual Machines

Wayne-workman.28155: /* Virtual Machines */

2016-04-01T20:54:02Z

‎Virtual Machines

@@ Line 1,087: / Line 1,087: @@
 | ADMtek || Pegasus AN986 || ? || ? || [http://cateee.net/lkddb/web-lkddb/USB_PEGASUS.html check PCI ID] || - || '''just listing it here, not confirmed working''', devices using the same chip: ADMtek ADM8511 Pegasus II, D-Link DSB-650TX
 |-
-| ASIX || AX88179 || 3.0/2.0 || 1GiB || [http://cateee.net/lkddb/web-lkddb/USB_NET_AX88179_178A.html check PCI ID] || - || '''just listing it here, not confirmed working''', devices using the same chip: D-Link DUB-1312, [https://forums.fogproject.org/topic/6510/boot-dell-xps-12-to-usb-to-network-card/27 Sabrent USB-G1000], Sitcomm LN-032, Startech USB31000S and USB32000S (and US1GC30?), ThinkPad OneLink dock
+| ASIX || AX88179 || 3.0/2.0 || 1GiB || [http://cateee.net/lkddb/web-lkddb/USB_NET_AX88179_178A.html check PCI ID] || - || [https://forums.fogproject.org/post/142990 confirmed working] '''using ncm–ecm–axge.efi''', devices using the same chip: D-Link DUB-1312, [https://forums.fogproject.org/topic/6510/boot-dell-xps-12-to-usb-to-network-card/27 Sabrent USB-G1000], Sitcomm LN-032, Startech USB31000SPTB, USB31000S and USB32000S (and US1GC30?), ThinkPad OneLink dock
 |-
 | ASIX || AX88772A/B || 2.0 || 100MiB || [http://cateee.net/lkddb/web-lkddb/USB_NET_AX8817X.html check PCI ID] || 2015-01-15 || [https://forums.fogproject.org/topic/2666/fog-pxe-boot-with-usb-to-ethernet-adapter/43 confirmed] [https://forums.fogproject.org/topic/6036/hp-stream-11-pro working] (with undionly.kkpxe), devices using the same chip: Ableconn USB2E100B, Aten UC210T, Billionton Systems USB2AR and GUSB2AM-1G-B, Buffalo LUA-U2-KTX, Corega FEther USB2-TX, D-Link DUB-E100, Hawking UF200, Linksys USB200M, Netgear FA120, Sitecom LN-029, Sitecom LN-028, Intellinet USB 2.0 Ethernet, ST Lab USB 2.0 Ethernet, TrendNet TU2-ET100

@@ Line 754: / Line 754: @@
 |-
 | Intel || NUC NUC5i5RYH || &#10004;  || Default bzImage  || undionly.kpxe ||  2014-12-12 || Set to Legacy Boot - Disabled UEFI / Secure boot
 |-
 | MSI || Hetis 900 || -- || 2.6.39.1.core || -- || 2012-02-15 || 0.32 works well

@@ Line 537: / Line 537: @@
 | HP || DC7600 || --  || Kitchen Sink (ALL) || -- || 2009-01-23 ||
 |-
-| HP || DC7700 || -- || 3.2.4.core || -- ||  2012-02-15 || 0.32 works well.
+| HP || DC7700 || &#10004; || Default bzImage || undionly.kpxe ||  2019-09-17 ||
 |-
 | HP || DC7800 || &#10004; || Default bzImage || undionly.kpxe ||  2014-06-13 ||

@@ Line 827: / Line 827: @@
 | Lenovo || ThinkCentre Edge71 || -- || 0.32  || -- || 11-06-2012 || Works with default 0.32 kernel
 |-
-| Lenovo || ThinkCentre M900z  || -- || 1.3.5 || -- || 05/2017 || Turn off Secure boot by enabling '''CSM''', Boot Mode '''Auto''', Boot Priority '''UEFI First'''.  Booting from first HD from the FOG menu doesn't seem to work though, so don't put network boot first in the boot order
+| Lenovo || ThinkCentre M900z  || -- || 1.3.5 || -- || 05/2017 || Temporarily turn off Secure boot by enabling '''CSM'''. Boot to the FOG menu once.  Then go back and disable '''CSM'''.  After that, you're free to put your network interfaces first in the boot order.
 |-
 | Lenovo || ThinkCentre M90z  || -- || 0.29 || -- || 08/2010 || works out of the box, BIOS 9BKT28AUS and 9BKT31AUS

@@ Line 826: / Line 826: @@
 |-
 | Lenovo || ThinkCentre Edge71 || -- || 0.32  || -- || 11-06-2012 || Works with default 0.32 kernel
 |-
 | Lenovo || ThinkCentre M90z  || -- || 0.29 || -- || 08/2010 || works out of the box, BIOS 9BKT28AUS and 9BKT31AUS

@@ Line 301: / Line 301: @@
 | Dell || Precision 350 || -- || FOG 0.29 || -- ||  2011-03-14 ||
 |-
-| Dell || Precision 370 || -- || FOG 0.30 || -- ||  2011-03-24 || Fog message says doesn't recognize system. Did quick inventory to get system registered. Had to reboot twice when initial upload image task didn't work. Second try went through ok. Haven't tested restore.
+| Dell || Precision 370 || -- || FOG 0.30 || -- ||  2011-03-24 || Fog message says doesn't recognize system. Did quick inventory to get system registered. Had to reboot twice when initial capture image task didn't work. Second try went through ok. Haven't tested restore.
 |-
 | Dell || Precision 390 || -- || --  || -- ||  2009-05-21 ||
@@ Line 1,039: / Line 1,039: @@
 ! Manufacturer !! Model !! BIOS Version !! Onboard NIC !! Kernel Version !! Date !! Notes
 |-
-|Asus || M4N78-AM V2 || 1102  || Nvidia NForce || Fog 0.29 || 2011-02-12 || Upload test !
+|Asus || M4N78-AM V2 || 1102  || Nvidia NForce || Fog 0.29 || 2011-02-12 || capture test !
 |-
 |Asus || M5A88-M || 0505  || Realtek 8111E || 3.3.3 Core || 2013-01-13 || FOG 0.32, wouldn't boot with default kernel, but later discovered was another issue (not kernel related)

@@ Line 1,095: / Line 1,095: @@
 | Realtek || RLT8152 || 2.0 || 100MiB || [http://cateee.net/lkddb/web-lkddb/USB_RTL8152.html check PCI ID] || 2016-01-13 || [https://forums.fogproject.org/topic/6227/surface-3-fails-to-image/41 confirmed] [https://www.youtube.com/watch?v=UFYNan98lmw working], devices using the same chip: Microsoft 1552 ([http://svn.exactcode.de/t2/trunk/package/base/linux/surface-dock-eth.patch needs kernel patch])
 |-
-| Realtek || RLT8153 || 3.0 || 1GiB || [http://cateee.net/lkddb/web-lkddb/USB_RTL8152.html check PCI ID] || 2015-07-09 || [https://forums.fogproject.org/topic/6319/m-2-pcie-ssd-not-recognised-in-fog confirmed] [https://forums.fogproject.org/topic/2620/realtek-8153-usb-network-adapter/29 working] (using undionly.kkpxe), devices using the same chip: Lenovo USB 3.0 Ethernet 4X90E51405, Microsoft 1663 ([http://svn.exactcode.de/t2/trunk/package/base/linux/surface-dock-eth.patch needs kernel patch]), TP-Link UE300
+| Realtek || RLT8153 || 3.0 || 1GiB || [http://cateee.net/lkddb/web-lkddb/USB_RTL8152.html check PCI ID] || 2015-07-09 || [https://forums.fogproject.org/topic/6319/m-2-pcie-ssd-not-recognised-in-fog confirmed] [https://forums.fogproject.org/topic/2620/realtek-8153-usb-network-adapter/29 working] (using undionly.kkpxe), devices using the same chip: Dell USB-C Network Adapter 470-ABND, Lenovo USB 3.0 Ethernet 4X90E51405, Microsoft 1663 ([http://svn.exactcode.de/t2/trunk/package/base/linux/surface-dock-eth.patch needs kernel patch]), TP-Link UE300
 |-
 | SMSC || LAN7500 || 2.0 || 1GiB || [http://cateee.net/lkddb/web-lkddb/USB_NET_SMSC75XX.html check PCI ID] || 2016-02-02 || [http://www.johnwillis.com/2014/03/pxe-booting-using-usb-to-ethernet-dongle.html confirmed] [https://forums.fogproject.org/topic/6510/boot-dell-xps-12-to-usb-to-network-card/67 working], devices using the same chip: Startech USB21000S2

@@ Line 1,102: / Line 1,102: @@
 |}
-=== Virtual Machines ===
+=== Virtual Machines for building images ===
 {| class="wikitable sortable" border="1" cellspacing="0" cellpadding="3"
 |-
 ! Manufacturer !! Model !! BIOS Version !! Onboard NIC !! Fog 1.x.x !!Kernel Version !! IPXE !! Date !! Notes
 |-
 |Proxmox VE 3.1|| KVM virtual machine || Seabios 1.7.4  || Intel E1000 || -- || FOG 0.32 || -- || 2014-01-04 || VM CPU=Nehalem (not working with CPU=Host), kernel arguments (maybe not necessary) acpi=off irqpoll vga=6