.fogsettings

From FOG Project
Revision as of 00:48, 15 May 2016 by Tom-elliott.7271 (talk | contribs) (dnsbootimage)
Jump to: navigation, search

In most versions of FOG (including 1.2.0 and 1.3.0), the low-level settings that are used during installation and some settings that simply cannot be stored in the database are contained in the /opt/fog/.fogsettings file.

This file contains the setup of variables used within the installer during upgrades/installs.

An example .fogsettings file

Example .fogsettings file

## Start of FOG Settings
## Created by the FOG Installer
## Version: 7625
## Install time: Sat 14 May 2016 08:05:18 PM EDT
ipaddress='192.168.1.5'
interface='eth0'
submask='255.255.255.0'
routeraddress='192.168.1.1'
plainrouter='192.168.1.1'
dnsaddress='192.168.1.1'
dnsbootimage='192.168.1.1'
username='fog'
password='Some!random_Password\here0918358'
osid='2'
osname='Debian'
dodhcp='N'
bldhcp='0'
dhcpd='isc-dhcp-server'
blexports='1'
installtype='N'
snmysqluser=''
snmysqlpass=''
snmysqlhost=''
installlang='0'
donate='0'
storageLocation='/images'
fogupdateloaded=1
docroot='/var/www/html/'
webroot='fog/'
caCreated='yes'
startrange=''
endrange=''
bootfilename='undionly.kpxe'
packages='apache2 php7.0 php7.0-json php7.0-gd php7.0-cli php7.0-curl mysql-server mysql-client tftpd-hpa tftp-hpa nfs-kernel-server vsftpd net-tools wget xinetd sysv-rc-conf tar gzip build-essential cpp gcc g++ m4 htmldoc lftp openssh-server php-gettext php7.0-mcrypt php7.0-mysql curl libc6 libcurl3 zlib1g php7.0-fpm libapache2-mod-php7.0 php7.0-mbstring'
noTftpBuild=''
notpxedefaultfile=''
sslpath='/opt/fog/snapins/ssl/'
backupPath='/home/'
## End of FOG Settings

Definitions

Header/Footer

Header

Only gives some simplistic information to help users. Does no actions just gives some information.

## Start of FOG Settings
## Created by the FOG Installer
## Version: 7625
## Install time: Sat 14 May 2016 08:05:18 PM EDT

Footer

Does no actions, just tells where FOG's default variables are setup Any new items will go below this, and you can add your own variables. You can add variables wherever you want.

## End of FOG Settings

IP Address

Defines the IP address of the node/server. This is also used on servers to setup the default.ipxe file.

ipaddress='192.168.1.5'

Interface

This just sets the storage nodes/server interface as it will be stored in the Database. This used to be used for multicast setups and for the bandwidth graph. This is now setup so it is only used on the bandwidth graph as we already know the ip address anyway. Multicast tasks can get their own interface instead of relying on user entry.

interface='eth0'

Subnet Mask

This defines the subnet mask to use if the system is to be used as a DHCP server. It will assume the subnet mask of the interface being used, but can be changed later if you see fit.

submask='255.255.255.0'

Router Address

This will setup the router address to use if the system is to be used as a DHCP server. It currently only sets as an ip address, but in the past contained the whole dhcp configuration string. The config string was removed as it would only work on isc-dhcp-server, when some might be using dnsmasq or another dhcp server.

routeraddress='192.168.1.1'

Plain Router

Very similar to the Router Address elements above, but can be used to redirect to maybe another router/switch other than the main.

plainrouter='192.168.1.1'

DNS Address

dnsaddress

Used, again, for DHCP setup.

dnsaddress='192.168.1.5'

dnsbootimage

No longer used. It's purpose was originally because the FOS (Fog Operating System -- init.xz/init_32.xz/init.gz) did not dynamically get the dns address from DHCP as dhcp was not called.

dnsbootimage='192.168.1.5'