Difference between revisions of "Build FOG file system with BuildRoot"

From FOG Project
Jump to: navigation, search
(build FOG file system)
m (Download the relevant FOG source)
Line 16: Line 16:
  
 
  svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc
 
  svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc
 
  
 
=== Download Buildroot ===
 
=== Download Buildroot ===

Revision as of 23:07, 18 November 2014

In order for the FOG Client to boot on the hosts, it requires a kernel and a filesystem image containing its filesystem. Buildroot helps building the toolchain (uclibc) and generate that image with busybox and all the packages we need. This page will tell you how to build the filesystem on your own from SVN.

Debian 7

Debian update

sudo apt-get update
sudo apt-get upgrade

Install the required packages for buildroot

sudo apt-get install build-essential subversion git bison flex gettext texinfo zlib1g-dev uuid-dev ncurses-dev unzip libpci-dev libssl-dev

Download the relevant FOG source

svn checkout https://freeghost.svn.sourceforge.net/svnroot/freeghost/trunk/src fogsrc

Download Buildroot

wget http://buildroot.uclibc.org/downloads/buildroot-2014.08.tar.bz2
tar xjf buildroot-2014.08.tar.bz2

Copy source files inside Buildroot's tree

cp -r fogsvn/buildroot/* buildroot-2014.08/
cd buildroot-2014.08
mv fog.buildroot.config.32 .config # or config.64 for 64 bits

build FOG file system

make menuconfig
# This will download all the required packages from their sources, it's around 300 MB
make source
# All packages are now in buildroot-2014.08/dl/ So we compile.
# Go get some coffee, this takes a long time, depending on your config.
make
# Here is our init.xz
cp output/images/rootfs.ext2.xz ../init.xz
cd ..
copy init.xz to your FOG server /tftpboot/fog/images/init_32.xz (or init.xz for 64 bits)