Build TomElliott Kernel

From FOG Project
Revision as of 12:54, 18 July 2016 by Tom-elliott.7271 (talk | contribs) (linux/drivers/scsi/storvsc_drv.c)
Jump to: navigation, search

PRE BUILD ENVIRONMENT IS ASSUMED ALREADY INSTALLED ON THE SYSTEM YOU'RE BUILDING NOTE: It is assumed you have root access to the system you're building this on. It also assumes you know your CWD (Current Working Directory).

Build TomElliott Kernel for FOG 0.32 and earlier

The below instructions are to build the TomElliott kernel. There is an extra step involved compared to the normal kernel build as there are firmware's built directly into the kernels now.

Download the Kernel

As of the time of this writing kernel 3.13 is the latest. You can use previous, or future kernels as well though.

wget https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.13.tar.xz

Uncompress the kernel

tar -xf linux-3.13.tar.xz

Go into uncompressed linux kernel directory

cd linux-3.13

Get the config file

wget https://svn.code.sf.net/p/freeghost/code/trunk/kernel/TomElliott.config.32 -O .config

Download the prerequisite package (THE EXTRA STEP IS HERE)

git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git

Prepare the build

make ARCH=i386 menuconfig

Add any choices, or don't but when you exit, it will ask you to save the config, NEEDED.

After you've saved the config.

Build the bzImage

make ARCH=i386 bzImage

This will take a while. Once successful, it will say bzImage created.

Copy the built kernel to your FOG Server's kernel directory.

NOTE: In my example, the FOG Server is the same as my build system. NOTE: Recommend to make a backup of the original /tftpboot/fog/kernel/bzImage before continuing just in case.

cp arch/x86/boot/bzImage /tftpboot/fog/kernel/bzImage

Build TomElliott Kernel for FOG 0.33b and newer

The below instructions are to build the TomElliott kernel. There is an extra step involved compared to the normal kernel build as there are firmware's built directly into the kernels now.

Download the Kernel

As of the time of this writing kernel 3.13 is the latest. You can use previous, or future kernels as well though.

wget https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.13.tar.xz

Uncompress the kernel

tar -xf linux-3.13.tar.xz

Go into uncompressed linux kernel directory

cd linux-3.13

Get the config file

To Build 32 bit Kernel

wget https://svn.code.sf.net/p/freeghost/code/trunk/kernel/TomElliott.config.32 -O .config

To Build 64 bit Kernel

wget https://svn.code.sf.net/p/freeghost/code/trunk/kernel/TomElliott.config.64 -O .config

Download the prerequisite package (THE EXTRA STEP IS HERE)

git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git

Prepare the build

To Build 32 bit Kernel

make ARCH=i386 menuconfig

To Build 64 bit Kernel

NOTE: MUST BE ON A 64 BIT OS

make menuconfig

Add any choices, or don't but when you exit, it will ask you to save the config, NEEDED.

NOTE: If it doesn't ask you to save the configuration, the easiest method to ensure all will work fine is to deselect an small item and reselect it.

After you've saved the config.

Build the bzImage

To Build 32 bit Kernel

make ARCH=i386 bzImage

To Build 64 bit Kernel

make bzImage

This will take a while. Once successful, it will say bzImage created.

Copy the built kernel to your FOG Server's kernel directory.

NOTE: In my example, the FOG Server is the same as my build system. NOTE: Recommend to make a backup of the original /var/www/{html/fog,fog}/service/ipxe/bzImage before continuing just in case.

cp arch/x86/boot/bzImage /var/www/html/fog/service/ipxe/bzImage

Additional Patches

Edit the files within the linux decompressed folder:

drivers/net/usb/r8152.c

Relevant to the r8152 network cards. Search VENDOR_ID_REALTEK

If you don't see VENDOR_ID_MICROSOFT add the line: It should look like:

#define VENDOR_ID_MICROSOFT     0x045e

Search REALTEK_USB_DEVICE(VENDOR_ID_REALTEK

If you don't see VENDOR_ID_MICOSOFT add the lines:

    {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab)}
    {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6)}

drivers/mmc/card/block.c

Relevant to MMC block devices to remove the RPMB drive from view Search card->part[idx]

Right before the line add:

    if (!card->part[idx].size || (card->part[idx].area_type & MMC_BLK_DATA_AREA_RPMB)) continue;

drivers/net/ethernet/intel/e1000e/netdev.c

Search er32(TIMINCA)

In the for loop find: rem = do_div(temp, incvalue); Remove it and add in it's place:

    rem = incvalue != 0 ? do_div(temp,incvalue) : 0;

drivers/scsi/storvsc_drv.c

Search blk_queue_virt_boundary.

Delete the line and add:

    if (PAGE_SIZE - 1 < 0) blk_queue_virt_boundary(sdevice->request_queue, 0);
    else blk_queue_virt_boundary(sdevice->request_queue, PAGE_SIZE - 1);