Difference between revisions of "WorkingDevices"
(→Computers) |
|||
Line 650: | Line 650: | ||
| Lenovo || Thinkpad x301 || -- || -- || -- || (regular and Solid State Disk) | | Lenovo || Thinkpad x301 || -- || -- || -- || (regular and Solid State Disk) | ||
|- | |- | ||
− | | | + | | Lenovo || Thinkpad x61 || -- || -- || -- || |
|- | |- | ||
− | | | + | | Lenovo || ThinkStation S20 || -- || 0.29 || 08/2010 || works with Kernel-2.6.35.3PS |
|- | |- | ||
− | | | + | | Lenovo || ThinkStation D20 || -- || 0.29 || 08/2010 || works with Kernel-2.6.35.3PS |
|- | |- | ||
− | | | + | | Lenovo || Z60 || -- || -- || -- || |
|- | |- | ||
− | | | + | | IBM || 300 PL || -- || -- || -- || |
|- | |- | ||
− | | | + | | IBM || Thinkcenter || -- || -- || -- || |
|- | |- | ||
− | | | + | | IBM || Netvista || -- || -- || -- || |
|- | |- | ||
| RM || WV949(SGR) || -- || -- || -- || | | RM || WV949(SGR) || -- || -- || -- || |
Revision as of 21:00, 13 June 2014
Contents
Devices that are known/tested to work with FOG Imaging solution.
If you have a device that is known to work with FOG, please post it on this page.
We would like to thank for following manufacturers for sending devices to us to verify their devices will function with FOG:
- ByteSpeed Computers (http://www.bytespeed.com),
There have been many modifications since Fog v0.32. If you see a ✓ in the column for Fog 1.x.x+ it means this Make/Model computer has been tested and confirmed working.
Computers
Manufacturer | Model | Fog 1.x.x+ | Kernel Version | Date | Notes | |
---|---|---|---|---|---|---|
Acer | Aspire One D150-1920 | -- | -- | -- | ||
Acer | AspireOne AOA150 | -- | -- | -- | ||
Acer | Aspire One D250 | -- | -- | -- | Must use Multiple Partition Image - Single Disk (Not resizable) | |
Acer | Aspire 1520 | -- | Kernel 2.6.24-ks | -- | Requires kernel argument vga=6 to have a working display | |
Acer | Aspire 5310 | -- | -- | -- | ||
Acer | Aspire 5315 | -- | -- | -- | ||
Acer | Aspire 5670 Series | -- | -- | -- | ||
Acer | Aspire 5735 | -- | -- | -- | ||
Acer | Aspire 5920 | -- | -- | -- | ||
Acer | Aspire 5920G | -- | -- | -- | ||
Acer | Aspire 6930G | -- | -- | -- | ||
Acer | L460 Series | -- | -- | -- | ||
Acer | TravelMate 270 Series | -- | -- | -- | ||
Acer | TravelMate 290 Series | -- | -- | -- | ||
Acer | TravelMate 530 Series | -- | -- | -- | ||
Acer | TravelMate 6592 | -- | -- | -- | ||
Acer | TravelMate 6410 | -- | -- | -- | ||
Acer | TravelMate 7530 | -- | 0.28 | 2009-11-17 | South bridge ATI/AMD SB700. Cannot access SATA hard drive with kernel 0.27 and probably older ones. Use kernel 0.28 | |
Acer | Veriton L410 | -- | -- | -- | ||
Acer | Veriton L6610G | -- | -- | 2011-08-03 | Enable LAN Boot in BIOS: Advanced > Integrated Peripherals > Onboard LAN Option Rom | |
Acer | Veriton M410 | -- | -- | -- | Requires kernel args: acpi=force or acpi=off See the following forum post [1] | |
Acer | Veriton M480G | -- | Kernel 2.6.35.3-PS | 2011-03-23 | ||
Acer | Veriton X680B | -- | -- | -- | Works with: Kernel-2.6.35.7 Download [2] | |
Aopen | MP57-D | -- | FOG 0.32 | 2012-02-29 | Enable PXE in BIOS | |
Aopen | DE57-HA | -- | FOG 0.32 | 2012-02-29 | Enable PXE in BIOS | |
Asus | L3800 | -- | -- | -- | ||
Asus | L4R (Ergo Ensis L4500R) | -- | -- | -- | Buggy PXE - will boot roughly 1 out of 5 tries. gPXE works fine. tested with FOG 0.28 | |
Asus | EEE Top ET1601 | -- | -- | -- | Requires PS Kernel | |
Asus | EEE Box B202 | -- | -- | -- | ||
Asus | EEE Box EB1007 | -- | FOG 0.29 | 2012-05-01 | Change BIOS, AHCI -> IDE | |
Asus | EEE Box EB1012P | -- | FOG 0.29 | 2012-05-22 | Change BIOS, AHCI -> IDE, Crucial SSD | |
Asus | EEE Box EB1033 | -- | FOG 0.29 | 2013-03-11 | Change BIOS, AHCI -> IDE, Crucial SSD | |
Asus | EeePC 1000HE | -- | FOG 0.29 | -- | ||
Asus | EeePC 1005PE | -- | FOG 0.29 | -- | ||
Asus | EeePC 1016PT | -- | FOG 0.29 | -- | ||
Asus | G1S | -- | FOG 0.29 | -- | ||
Asus | Z91E (Ergo Ensis S Z9100E) | -- | -- | -- | Works fine with FOG 0.28 | |
Boxx | 7500 series | -- | FOG 0.29 | 2011-03-03 | works with FOG 0.29, both Tyan and SuperMicro mobo versions | |
ByteSpeed | 10" N450 | -- | Core (2.6.36.1) | -- | Works with 'Core' Kernel | |
Compaq | Armada 1700 | -- | FOG 0.29 | 2010-11-08 | Using PCMCIA Cardbus NICs under Ubuntu 10.x. See "Known issues" under Ubuntu. | |
Compaq | Armada 1750 | -- | FOG 0.29 | 2010-11-08 | Using PCMCIA Cardbus NICs under Ubuntu 10.x. See "Known issues" under Ubuntu. | |
Compaq | iPAQ 777 | -- | -- | -- | BIOS sees max 10GB disk. | |
Compaq | Presario SR1607FR | -- | FOG 0.32 | 2012-06-06 | kernel 2-6-35-7-ks | |
Data Limited | DLI 8300 | -- | -- | 2009-11-1 | Rugged -- | |
Dell | Dimension E510 | -- | -- | -- | ||
Dell | Dimension 2400 | -- | -- | -- | ||
Dell | Dimension 3000 | -- | -- | -- | ||
Dell | Dimension 4100 | -- | -- | -- | ||
Dell | Dimension 4600 | -- | -- | -- | ||
Dell | Inspiron 1464 | -- | -- | -- | ||
Dell | Inspiron 1525 | -- | -- | -- | ||
Dell | Inspiron 1545 | -- | FOG 0.29 | 2011-03-14 | ||
Dell | Inspiron 1546 | -- | -- | -- | ||
Dell | Latitude 3330 | ✓ | Default bzImage | 2014-06-03 | ||
Dell | Inspiron 3800 | -- | FOG 0.29 | 2010-11-08 | Using PCMCIA Cardbus NICs under Ubuntu 10.x. See "Known issues" under Ubuntu. | |
Dell | Inspiron 4100 | -- | -- | -- | ||
Dell | Inspiron 8600 | -- | -- | -- | ||
Dell | Latitude D520 | -- | -- | 2011-06-22 | ||
Dell | Latitude D630 | -- | 2.6.35.7 KS | 2011-02-24 | ||
Dell | Latitude D830 | -- | 2.6.35.7 KS | 2011-02-24 | ||
Dell | Latitude 131L | -- | -- | -- | ||
Dell | Latitude 2100 | -- | 0.28 | 3-26-10 | must reformat and repartition disk to single partition, reload WinXP SP3 using provided disks. Upload image fine after rebuilding Windows. Defrag several times before doing upload. | |
Dell | Latitude D410 | -- | -- | -- | ||
Dell | Latitude D430 | -- | -- | -- | ||
Dell | Latitude D510 | -- | -- | -- | ||
Dell | Latitude D520 | -- | -- | -- | ||
Dell | Latitude D530 | ✓ | Default bzImage | 2014-06-13 | ||
Dell | Latitude D531 | -- | -- | -- | the fix seems to be disable PC-Card/FireWire in the BIOS if you have reported errors | |
Dell | Latitude D600 | -- | -- | -- | ||
Dell | Latitude D610 | ✓ | Default bzImage | 2014-06-13 | ||
Dell | Latitude D620 | -- | 2.6.35.7 KS | 2011-02-24 | ||
Dell | Latitude D630 | ✓ | Default bzImage | 2014-06-13 | ||
Dell | Latitude D810 | -- | -- | -- | ||
Dell | Latitude D820 | -- | 2.6.35.7 KS | 2011-02-24 | ||
Dell | Latitude D830 | -- | 2.6.35.7 KS | 2011-02-24 | ||
Dell | Latitude E5400 | -- | 2.6.33.0-KS | -- | ||
Dell | Latitude E5500 | -- | -- | -- | ||
Dell | Latitude E6320 | -- | -- | 2011-05-31 | No issues, used .39 kernel and a few below it | |
Dell | Latitude E6400 | ✓ | Default bzImage | 2014-06-13 | ||
Dell | Latitude E6410 | ✓ | Default bzImage | 2014-06-13 | ||
Dell | Latitude E6420 | ✓ | Default bzImage | 2014-06-03 | ||
Dell | Latitude E6430 | -- | 3.6.9 FOG.32 | 1/29/2013 | Works with factory SSD (Samsung). | |
Dell | Latitude E6500 | -- | 2.6.35.7 KS | 2011-02-24 | ||
Dell | Latitude E6510 | -- | 2.6.35.7 KS | 2011-02-24 | ||
Dell | Latitude XT | -- | -- | -- | -- PC | |
Dell | Latitude XT 2 | -- | -- | -- | -- PC | |
Dell | Optiplex 160 | -- | 3.2.4.core | 2012-02-15 | 0.32 works well | |
Dell | Optiplex 170L | -- | -- | -- | ||
Dell | Optiplex 210L | -- | -- | -- | ||
Dell | Optiplex GX150 | -- | -- | -- | ||
Dell | Optiplex GX200 | -- | -- | -- | ||
Dell | Optiplex GX240 | -- | -- | -- | ||
Dell | Optiplex GX260 | -- | -- | -- | ||
Dell | Optiplex GX270 | -- | Kitchen Sink (ALL) | 2012-09-20 | DOES NOT work with Kernel 3.3.3.core or Kernel 3.2.4.core. DOES work with FOG 0.32 default Kernel. | |
Dell | Optiplex GX280 | -- | Kitchen Sink (ALL) | 2009-01-23 | ||
Dell | Optiplex GX520 | -- | -- | -- | ||
Dell | Optiplex GX620 | ✓ | bzImage | 2014-06-13 | ||
Dell | Optiplex SX280 | -- | -- | -- | ||
Dell | Optiplex 320 | -- | -- | -- | kernel args: acpi=force irqpoll - Use Dell Bios 1.1.12 | |
Dell | Optiplex 330 | -- | -- | -- | ||
Dell | Optiplex 360 | -- | -- | 2012-04-03 | Ubuntu 10.x w/ FOG .32 | |
Dell | Optiplex 380 | ✓ | Default bzImage | 2014-06-03 | ||
Dell | Optiplex 390 | ✓ | Default bzImage | 2014-06-03 | disable Deep Sleep in BIOS | |
Dell | Optiplex 740 | -- | PS (2.6.28.7) | -- | Problematic http://sourceforge.net/forum/forum.php?thread_id=2335674&forum_id=716419
Works with 740 Enhanced with bios version 2.1.8 and 2.2.2 | |
Dell | Optiplex 745 | ✓ | Default bzImage | 2014-06-03 | Working with the latest bios 2.6.2 | |
Dell | Optiplex 755 | -- | 2.6.35.7 KS | 2011-02-24 | ||
Dell | Optiplex 760 | -- | -- | -- | With Kernel: 2.6.28 or FOG 0.25+. Problematic with newer kernel (at least 2.6.36.1 Core +): http://fogproject.org/forum/threads/snow-screen-with-hp-elitebook-8460p.164/ | |
Dell | Optiplex 780 | -- | 2.6.35.7 KS | 2011-09-06 | Not working with kernel 2.6.39.1 Core | |
Dell | Optiplex 790 | -- | -- | 2011-11-25 | Same as Optiplex 390 | |
Dell | Optiplex 7010 | -- | 3.6.9 FOG.32 | 1/29/2013 | Similar to Optiplex 790 | |
Dell | Optiplex 960 | ✓ | Default bzImage | 2014-06-03 | ||
Dell | Optiplex 980 | -- | FOG 0.28 | 05/26/2011 | Does not work with .30 We are using .30 and changed these hosts to use the .28 kernel | |
Dell | Optiplex 990 | -- | >= FOG 0.30 | 2011-05-05 | Intel NIC. Would not work with 0.29, Works with 0.30 but freezes after booting into FOG. However, hitting ESC allows you to continue. You will receive an error about incompatible BIOs, then it will start imaging. Confirmed working with .31 | |
Dell | Optiplex 3020 | ✓ | Default bzImage | 2014-06-03 | ||
Dell | Optiplex 7010 | ✓ | Default bzImage | 2014-06-03 | ||
Dell | Optiplex 9020 | ✓ | Default bzImage | 2014-06-03 | ||
Dell | Precision 340 | -- | -- | -- | ||
Dell | Precision 350 | -- | FOG 0.29 | 2011-03-14 | ||
Dell | Precision 370 | -- | FOG 0.30 | 2011-03-24 | Fog message says doesn't recognize system. Did quick inventory to get system registered. Had to reboot twice when initial upload image task didn't work. Second try went through ok. Haven't tested restore. | |
Dell | Precision 390 | -- | -- | 2009-05-21 | ||
Dell | Precision 490 | -- | -- | -- | ||
Dell | Precision 650 | ✓ | Default bzImage | 2014-06-13 | ||
Dell | Precision T3400 | -- | -- | -- | ||
Dell | Precision T3500 | -- | -- | -- | ||
Dell | Precision T5400 | -- | -- | -- | ||
Dell | Precision M60 | -- | FOG 0.32 | 2012-05-07 | ||
Dell | Precision M4400 | -- | -- | -- | ||
Dell | PowerEdge SC1425 | -- | 2.6.29 | 2009-07-07 | none - works great | |
Dell | PowerEdge SC1435 | -- | 2.6.29 | 2009-07-07 | none - works great | |
Dell | PowerEdge R200 | -- | 2.6.28 | 2009-07-07 | ** Had to roll back to FOG Kernel-2.6.28.7.PS - Kernel-2.6.29 would not load tg3 module (see possible Linux bug discussion here). Also had to add "-m" option to Partimage... see here for details | |
Dell | Studio 1557/1558 (PP39L) | -- | FOG 0.32 | -- | default kernel | |
Dell | Vostro 200 | -- | -- | -- | I needed change the SATA mode to ATA in the BIOS | |
Dell | Vostro 220 | -- | -- | -- | Works with latest FOG "PS" kernel, with either BIOS setting ATA or AHCI setting | |
Dell | Vostro 220 | -- | 2.6.39.1.core | 2012-02-15 | 0.32 works well | |
Dell | Vostro 230 | -- | 2.6.39.1.core | 2012-02-15 | 0.32 works well | |
Dell | Vostro 260 | -- | 2.6.39.1.core | 2012-02-15 | 0.32 works well | |
Dell | Vostro 320 | -- -- | -- | 2010-01-31 | Sata set to Compatible in BIOS. | |
Dell | Vostro 410 | -- | 2.6.35.7 KS | 2012-12-18 | "irqpoll" in kernel arguemnts | |
Dell | Vostro 460 | -- | 2.6.35.7-KS | 2011-05-27 | ||
Dell | Vostro 1220 | -- | 2.6.31.1 | 2009-12-06 | ||
Dell | Vostro 1520 | -- | -- | -- | Gives error "ide1: Unexpected interrupt, status=0xff, count=n" during imaging, but works anyway. | |
Dell | Vostro 1700 | -- | -- | -- | ||
Dell | Vostro 1700 | -- | Kernel FOG 0.30 | 2011-05-06 | Must specify /dev/sdb un web interface cause /dev/sda seems to be something else | -- |
Dell | Vostro 3500 | -- | -- | -- | Works with this kernel Kernel - 2.6.39 Core FOG ID: 1045 Date: May 27, 2011 Version: 2.6.39 FOG Type: Core | |
Dell | Vostro v131 | ✓ | Default bzImage | 2014-06-03 | ||
eMachines | E520 | -- | -- | -- | ||
Fujitsu | t4010 -- PC | -- | -- | -- | ||
Fujitsu-Siemens | Esprimo Mobile U9200 | -- | -- | -- | sata set to compatible in the bios | |
Fujitsu-Siemens | Esprimo Mobile V5505 | -- | -- | 2009-03-13 | ||
Fujitsu-Siemens | Esprimo Mobile V5515 | -- | -- | 2010-12-14 | Needs SiS-191 NIC workaround to image | |
Fujitsu-Siemens | Esprimo E5600 | -- | -- | 2009-10-01 | ||
Fujitsu-Siemens | Esprimo P5700 | -- | -- | -- | ||
Fujitsu-Siemens | Esprimo P2530 | -- | -- | 2009-03-18 | sata set to enhanced in the bios | |
Fujitsu-Siemens | Esprimo P2560 | -- | FOG 0.32 | 2012-02-29 | ||
Fujitsu-Siemens | Esprimo P3510 | -- | FOG 0.32 | 2012-02-29 | ||
Fujitsu-Siemens | Scenic Edition X 102 | -- | -- | -- | ||
Fujitsu-Siemens | Scenic P300 sis661 | -- | FOG 0.32 | 2012-06-12 | Default kernel, model with sis based mainboard | |
Fujitsu-Siemens | Scenic P320 | -- | FOG 0.32 | 2012-02-29 | ||
Fujitsu-Siemens | Scenic C610 | -- | -- | -- | ||
Gateway | E-4100 | -- | ALT | -- | Requires ALT kernel with Gateway BIOS | |
Gateway | E-4300 | -- | ALT | -- | Using ALT for E4100 but should work without. | |
Gateway | E-4500S | -- | Default | 2011-07-05 | Had to enable Legacy mode for the Sata/IDE controller in Bios | |
Gateway | E-4610S | -- | -- | -- | ||
Gateway | E295C | -- | -- | -- | ||
Gateway | E155C | -- | -- | -- | ||
Gateway | E265M | -- | -- | -- | ||
Gateway | E275M | -- | ALT | -- | Using ALT for E4100 but should work without. | |
Gateway | E460M | -- | ALT | -- | Using ALT for E4100 but should work without. Requires kernel argument acpi=off | |
Gateway | E475M | -- | -- | -- | ||
Gateway | MX3417 | -- | -- | -- | ||
Gateway | MX6931 | -- | -- | -- | ||
Gateway | MX6448 | -- | -- | -- | ||
Gateway | Profile 3 | -- | -- | -- | ||
Gateway | Profile 4 | -- | -- | -- | Using ALT, otherwise display was scrambled for this model's GEForce MX400. Screen will take time to wake, it can make you think PXE not loading. | |
Gateway | Profile 6 | -- | -- | -- | ||
HiGrade | ?L100 | -- | -- | -- | ||
HP | Mini 2140 | -- | -- | -- | ||
HP | 2710p | -- | Kitchen Sink (ALL) | 2009-01-23 | ||
HP | 2730P | -- | Peter Sykes (ALL) | 2009-01-23 | ||
HP | 3125 | -- | -- | 2013-06-25 | Not compatible with Kernel 3.8.8.core | |
HP | 8510p | -- | -- | -- | not tested yet with sata native enabled in bios | |
HP | Compaq 6000 Pro | -- | 0.31 | 2011-06-22 | ||
HP | Compaq 6000 Pro | -- | -- | 2011-08-04 | ||
HP | Compaq 6005 Small | -- | 0.31 | 2011-06-22 | ||
HP | Compaq 6200 Pro | -- | 0.32 | 2011-08-04 | ||
HP | Compaq 6710b | -- | -- | -- | ||
HP | Compaq 6715s | -- | -- | -- | ||
HP | Compaq 6715b | -- | -- | -- | ||
HP | Compaq 6720s | -- | -- | -- | ||
HP | Compaq 6730b | -- | -- | 2009-06-10 | ||
HP | Compaq 6735b | -- | -- | -- | Working also with AHCI SATA settings in BIOS (0.26) | |
HP | Compaq 6910p | -- | -- | -- | ||
HP | Compaq n610c | -- | -- | -- | Working with Alt or KS kernel | |
HP | nc6320 | -- | -- | -- | ||
HP | nc6400 | -- | FOG 0.32 | 2012-05-07 | ||
HP | nx6100 | -- | FOG 0.32 | 2012-05-07 | ||
HP | Compaq NX6325 | -- | -- | -- | ||
HP | 550 | -- | -- | -- | ||
HP | D530 | -- | -- | -- | Requires Translation Mode to be set to LBA Assisted for HDD in BIOS | |
HP | DC5100 | -- | -- | -- | ||
HP | DV9620US | -- | -- | 2010-05-04 | ||
HP | DC5700 | ✓ | Default bzImage | 2014-06-13 | ||
HP | DC5750 | -- | -- | -- | ||
HP | DC5800 | -- | -- | -- | ||
HP | DC5850 | -- | -- | -- | ||
HP | DC7100 | -- | -- | -- | ||
HP | DC7600 | -- | Kitchen Sink (ALL) | 2009-01-23 | ||
HP | DC7700 | -- | 3.2.4.core | 2012-02-15 | 0.32 works well. | |
HP | DC7800 | ✓ | Default bzImage | 2014-06-13 | ||
HP | DC7900 | -- | Kitchen Sink (ALL) | 2009-10-06 | Tested with Kernel-2.6.31.1.kitchensink. Blue screens in AHCI mode unless drivers are loaded, deactivate it in BIOS or install AHCI driver before upload. | |
HP | DC8200 | -- | 0.33 Beta with core 3.8.8 and 3.2.4 | 2013-08-20 | Got an ioctl error but working without problems. | |
HP Compaq | D610 | -- | 3.2.4.core | 2012-02-15 | 0.32 works well | |
HP | 620 | -- | 3.2.4.core | 2012-02-15 | 0.32 works well | |
HP Compaq | 8200 Elite | -- | 3.2.4.core | 2012-02-15 | 0.32 works well | |
HP | DX2200MT | -- | -- | 2011-07-13 | ||
HP | DX2000MT | -- | -- | -- | Requires kernel args: acpi=force irqpoll, acpi=off also works. | |
HP | DX6100MT | -- | -- | -- | Requires Translation Mode to be set to LBA Assisted for HDD in BIOS | |
HP | DX2250 | -- | -- | -- | ||
HP | DX2300 | -- | -- | -- | ||
HP | DX2400 | -- | -- | -- | ||
HP | Business -- 6000 Pro | -- | -- | 2009-12-15 | ||
HP | Business -- 6005 Pro | -- | 0.28 | 15-02-2010 | Only seems to with "Multiple Partition Image - Single Disk" | |
HP | Business -- DX7500 | -- | -- | 2010-01-04 | ||
HP | Business -- 8000 Elite | -- | -- | 2010-05-17 | 0.29 Kernel - 2.6.35.7 PS, with "acpi=off irqpoll hpet=disable" kernel arguments (may work without them). Kernel 2.6.37-core panics. | |
HP | Business -- 8100 Elite | -- | -- | 2010-01-18 | 0.29 Kernel - 2.6.35.7 PS otherwise poor performance. | |
HP | HP Touch Smart 9100 Business PC | -- | -- | 2010-07-16 | 0.29 | |
HP | XW4400 | -- | -- | -- | ||
HP | XW4600 | -- | -- | 2011-08-03 | ||
HP | xw9400 | -- | -- | 2011-03-03 | Works fine with FOG 0.29, Windows 7 | |
HP | Z400 | -- | -- | 2011-03-03 | Works fine with FOG 0.29, Windows 7 | |
HP | Z600 | -- | -- | 2011-03-03 | Works fine with FOG 0.29, Windows 7 | |
HP | Z800 | -- | -- | 2011-03-03 | Works fine with FOG 0.29, Windows 7 | |
HP | Pavilion dv4000 | -- | -- | 2010-08-18 | 0.29 | |
HP | Pavilion dv7-3125ef | -- | default Kernel 0.30 | 2011-05-27 | ||
HP | Pavilion 734n | -- | -- | -- | ||
HP | NX7400 | -- | -- | -- | ||
HP | Pavilion dm1-3010nr | -- | Kernel-2.6.35.7.kitchensink | 9/14/2011 | Works with Kernel-2.6.35.7.kitchensink and kernel arugements acpi=off noirq pci=use_crs | |
HP | NX7300 | -- | -- | -- | ||
HP | Pavilion ze2000 | -- | -- | -- | ||
HP | Mini 1101 | -- | -- | -- | ||
HP | Mini Note | -- | -- | -- | ||
HP | Mini 5102 | -- | 0.29 | 2010-07-09 | Very poor performance on imaging until acpi=force irqpoll was used as a Host Kernel Argument | |
HP | Mini 5103 | -- | -- | 2012-01-19 | Disabling audio in BIOS will circumvent extremely slow imaging issue | |
HP | Mini Note 110 | -- | -- | -- | ||
HP | Mini 311-1037NR | -- | PS 2.6.28 | 2010-12-06 | FOG .29 with kernel arg acpi=off noirq pci=use_crs Win 7 | |
HP | EliteBook 6930p | -- | -- | -- | ||
HP | EliteBook 8440p | -- | FOG 0.32 | -- | ||
HP | EliteBook 8540p | -- | KS from Aug 10 2010 | 2010-03-30 | Did not recognize NIC until Kernel was updated to Kitchen Sink build from Aug 10 2010 | |
HP | Pro 3000 MT | -- | 2.6.35.3 PS | 2011-02-02 | ||
HP | Pro 3400 MT | -- | 2.6.28.7 PS | 2012-02-21 | Works well | |
HP | Pro 3015 MT | -- | 2.6.35.3 PS | 2010-08-25 | Requires kernel argument hpet=disable (if not disabled you will get ehci/ohci interrupt errors, very slow boot, and the ethernet device will no longer work while kernel initializes himself). | |
HP | ProBook 4510s | -- | 0.29 | 2010-07-09 | Requires gPXE boot disk | |
HP | ProBook 4515s | -- | FOG 0.28 | 2010-06-28 | May have a Blinking cursor after graphical FOG PXE menu and hard disk set to AHCI mode and using Windows XP. | |
HP | ProBook 4520s | -- | FOG 0.32 | 2012-05-07 | ||
HP | ProBook 4525s | -- | FOG 0.29 | 2011-05-03 | May have a Blinking cursor after graphical FOG PXE menu (Bios F.08). Upon changing to bios F.09, no changes in behavior. | |
HP | ProBook 6440b | -- | -- | -- | ||
HP | ProBook 6540b | -- | -- | -- | ||
HP | t5730 | -- | -- | 2010-05-03 | 0.29 | |
HP | t5730w 2GF/1GR | -- | -- | 2010-06-16 | 0.29 | |
HP | dx7300 | -- | 0.26 | 2011-06-16 | ||
HP | dx7400 | -- | 0.26 | 2011-06-16 | ||
HP | ML110g5 | -- | 0.26 | 2011-06-16 | ||
HP | ML150g6 | -- | 0.26 | 2011-06-16 | ||
IBM | ThinkCentre S50 | -- | FOG 0.32 | 2012-05-07 | ||
MSI | Hetis 900 | -- | 2.6.39.1.core | 2012-02-15 | 0.32 works well | |
MPC | TXTBook | -- | -- | -- | ATOM Based -- | |
MPC | ClientPro 365 | -- | -- | -- | ||
MSI | Wind U100 | -- | -- | 2009-05-15 | ||
MSI | MegaBook S270 (Model MS-6855B) | -- | Fog 0.29 | 2011-01-06 | ||
NEC | Powermate ML-7 | -- | Fog 0.28 | 2010-02-01 | ||
NEC | Powermate ML-250 | -- | FOG 0.28 | 2010-02-01 | Mainboard Asus P5S800, BIOS Ver 160 updated to 216: cannot connect to TFTP -- if IP differs from DHCP --. Use GPXE as a workaround. | |
NEC | Powermate VL-350 | -- | -- | 2009-06-25 | Requires kernel argument acpi=off irqpoll | |
NEC | Powermate VL-370 | -- | 2.6.30.1 KS | 2009-11-11 | Requires kernel argument acpi=off . If you don't set this argument, the BIOS will freeze on next boot. You will need to clear CMOS. | |
NEC | Versa One | -- | 2.6.35.3 PS | 2010-10-12 | Only worked with kernel 2.6.35.3 PS | |
Panasonic | Toughbook CF-W7 | -- | -- | -- | ||
Omni Tech | OTC-3200D01850 | -- | -- | -- | ||
Omni Tech | OTC-H3111D00 | -- | -- | -- | ||
Omni Tech | OTC-H3243D00 | -- | -- | -- | ||
Lenovo | A55 | -- | -- | -- | ||
Lenovo | M51 | -- | -- | -- | ||
Lenovo | M55 | -- | -- | -- | ||
Lenovo | M55P | -- | 0.31/32 | 07-20-2011 | ||
Lenovo | M57 | -- | -- | -- | ||
Lenovo | M58 | -- | -- | -- | ||
Lenovo | R500 | ✓ | Default bzImage | 2014-06-13 | ||
Lenovo | R60 | -- | -- | -- | ||
Lenovo | R61 | ✓ | Default bzImage | 2014-06-14 | ||
Lenovo | S9 | -- | -- | -- | Fails at within 30seconds of image uptake using (took image by placing hard disk in another Lenovo R500), Image loading works okay with v 0.28 | |
Lenovo | S10e | -- | -- | -- | -- | |
Lenovo | S10-2 | -- | -- | -- | -- | |
Lenovo | ThinkCenter A70z | -- | 0.29 | 08/2010 | needs Kernel-2.6.35.3PS, BIOS 98KT13AUS | |
Lenovo | ThinkCenter E31 | -- | 0.32 | 09/2012 | needs kernel 3.3.3.core | |
Lenovo | ThinkCentre Edge71 | -- | 0.32 | 11-06-2012 | Works with default 0.32 kernel | |
Lenovo | ThinkCenter M90z | -- | 0.29 | 08/2010 | works out of the box, BIOS 9BKT28AUS and 9BKT31AUS | |
Lenovo | ThinkCentre M75e | -- | 0.32 / 2.6.35.3 PS | 07/2011 | ||
Lenovo | ThinkCenter T400 | -- | 0.29 | 08/2010 | works with Kernel-2.6.35.3PS | |
Lenovo | ThinkCenter T500 | -- | 0.29 | 08/2010 | works with Kernel-2.6.35.3PS | |
Lenovo | ThinkCenter T510 | -- | 0.29 | 08/2010 | works with Kernel-2.6.35.3PS | |
Lenovo | ThinkCenter X61 | -- | 0.29 | 08/2010 | works with Kernel-2.6.35.3PS | |
Lenovo | ThinkPad E520 | -- | 0.32 | 02-10-2012 | ||
Lenovo | ThinkPad R61 | -- | 0.31 | 2011-06-22 | ||
Lenovo | Thinkpad R400 | -- | -- | -- | ||
Lenovo | Thinkpad SL500 | -- | -- | -- | Requires kernel argument irqpoll | |
Lenovo | Thinkpad SL410 | -- | 0.28 | -- | ||
Lenovo | Thinkpad Edge 13 | -- | 0.28 | -- | ||
Lenovo | Thinkpad Edge 15 | -- | 0.32 | -- | Requires PXE Bzimage upgrade to 3.012 | |
Lenovo | Thinkpad T60 | -- | 0.29 | 18-01-2011 | ||
Lenovo | Thinkpad T61 | -- | 0.27 | 14-08-09 | right off the bat with 0.27 | |
Lenovo | Thinkpad T400 | -- | -- | -- | ||
Lenovo | Thinkpad T410s | -- | 2.6.35.7 KS | 2011-02-24 | 0.29, Upload and deploy as Linux not Windows. | |
Lenovo | Thinkpad T420 | -- | -- | -- | 0.29, Need to run fdisk /mbr before -- will boot after imaging. | |
Lenovo | Thinkpad T500 | -- | 0.28 | 15-02-2010 | Only seems to with "Multiple Partition Image - Single Disk" | |
Lenovo | Thinkpad W510 | -- | 0.32 | 08-23-2013 | kernel 2.6.35-4 | |
Lenovo | Thinkpad x100e | -- | 0.29 | -- | ||
Lenovo | Thinkpad x200 | -- | -- | -- | (works with traditional HD and Solid State Disk) | |
Lenovo | Thinkpad x300 | -- | -- | -- | (regular and Solid State Disk) | |
Lenovo | Thinkpad x301 | -- | -- | -- | (regular and Solid State Disk) | |
Lenovo | Thinkpad x61 | -- | -- | -- | ||
Lenovo | ThinkStation S20 | -- | 0.29 | 08/2010 | works with Kernel-2.6.35.3PS | |
Lenovo | ThinkStation D20 | -- | 0.29 | 08/2010 | works with Kernel-2.6.35.3PS | |
Lenovo | Z60 | -- | -- | -- | ||
IBM | 300 PL | -- | -- | -- | ||
IBM | Thinkcenter | -- | -- | -- | ||
IBM | Netvista | -- | -- | -- | ||
RM | WV949(SGR) | -- | -- | -- | ||
Samsung | NC10 | -- | -- | -- | ||
Samsung | R20 (F00) | -- | -- | -- | ||
Samsung | R510 | -- | -- | -- | Requires kernel argument irqpoll | |
Samsung | R60 | -- | -- | -- | ||
Samsung | R60Plus | -- | -- | -- | ||
Shuttle | SA76G2 | -- | PS (2.6.28.7) | -- | With Marvel Yukon Gigabit Ethernet Controller | |
Sony | VAIO PCG-K23 | -- | -- | -- | ||
Sony | VAIO VGN-AR71M | -- | -- | -- | ||
Sony | VAIO VGN-BZ31VT | -- | 0.28 (2.6.31) | 2010-04-07 | ||
Sony | VAIO VGN-V2S | -- | -- | -- | ||
Sun | xVM Virtualbox | -- | -- | 2009-05-12 | ||
Toshiba | Tecra S1 | -- | -- | -- | ||
Toshiba | Tecra S2 | -- | -- | -- | ||
Toshiba | Tecra S3 | -- | -- | -- | ||
Toshiba | Tecra S4 | -- | -- | -- | ||
Toshiba | Tecra A3X | -- | -- | -- | ||
Toshiba | Tecra A7-S254 | -- | -- | -- | Imaged using the latest fog -- (0.27) | |
Toshiba | Tecra A9 | -- | -- | -- | ||
Toshiba | Tecra A10 | -- | -- | -- | ||
Toshiba | Tecra M10 | -- | -- | -- | ||
Toshiba | Tecra S11 | -- | -- | -- | use FOG 0.28 is very slow, FOG 0.29 NOT working ! ( BIOS 2.20 ) | |
Toshiba | Tecra S11-140 PTSE3E | -- | 0.29 | 2010-09-17 | Default kernel doesn't support ethernet interface. You must use the kernel 2.6.35.3 PS (KS doesn't work) | |
Toshiba | Tecra A10 | -- | -- | -- | ||
Toshiba | Tecra M10 | -- | -- | -- | ||
Toshiba | Protege M400 | -- | -- | -- | ||
Toshiba | Protege M600 | -- | -- | -- | ||
Toshiba | Protege M650 | -- | -- | -- | ||
Toshiba | Protege M700 | -- | -- | -- | ||
Toshiba | Protege M750 | -- | -- | -- | ||
Toshiba | Protege M780 | -- | -- | -- | ||
Toshiba | Protege R100 | -- | -- | -- | ||
Toshiba | Protege R200 | -- | -- | -- | ||
Toshiba | Protege R500 | -- | -- | -- | ||
Toshiba | Protege R600 | -- | -- | -- | BIOS 1.60 or newer | |
Toshiba | Satellite A10-S127 | -- | default | 2009-04-28 | ||
Toshiba | Satellite L300 | -- | -- | -- | ||
Toshiba | Satellite L350 | -- | -- | -- | ||
Toshiba | Satellite L670 | -- | 2.6.35 KS | 2011-04-06 | ||
Toshiba | Satellite Pro S300-EZ1513 | -- | Default | 28JUL09 |
Hardware
Controllers
- LSI SAS 1068
Motherboards
Manufacturer | Model | BIOS Version | Onboard NIC | Kernel Version | Date | Notes |
---|---|---|---|---|---|---|
Asus | M4N78-AM V2 | 1102 | Nvidia NForce | Fog 0.29 | 2011-02-12 | Upload test ! |
Asus | M5A88-M | 0505 | Realtek 8111E | 3.3.3 Core | 2013-01-13 | FOG 0.32, wouldn't boot with default kernel, but later discovered was another issue (not kernel related) |
Asus | M4A89GTD-PRO/USB3 rev 1.x | 2001 | Realtek 8111E | 3.3.3 Core | 2013-01-11 | FOG 0.32, also worked with default kernel |
Asus | M4A78LT-M-LE | 0407 | Atheros AR8131 | 3.3.3 Core | 2013-01-10 | FOG 0.32, also worked with default kernel |
ASRock | M3A785GXH/128M | 1.1 | Realtek RTL8111DL | .28 | 1.1.2010 | Works Great! |
Gigabyte | GA-MA770-DS3 rev 1.0 | F6 | Realtek 8111B | 2.6.28.7 Peter Sykes | 2009-04-28 | FOG 0.26, required different kernel than default |
Gigabyte | GA-78LMT-S2P rev ? | FB | Atheros AR8151 | 3.3.3 Core | 2013-01-14 | FOG 0.32, also worked with default kernel |
Intel | DG31GL | -- | -- | -- | -- | -- |
Intel | D845BG | -- | Intel Pro100VE | -- | -- | Problematic Intel Boot ROM version 4.0.19 (D845BGL) |
Intel | DG35EC | -- | -- | -- | -- | -- |
Intel | D945GCZ | -- | -- | -- | -- | -- |
Intel | DQ965JO | -- | -- | -- | -- | -- |
Intel | DP55WB | -- | -- | -- | -- | -- |
Intel | DQ45CB | -- | -- | -- | -- | -- |
Intel | DG35EC | -- | -- | -- | -- | -- |
Jetway | NF93R-LF | -- | 2 x Realtek RTL8111C | 2.6.30.1 ks | 2012-08-19 | kernel arguments (maybe not necessary) acpi=off irqpoll vga=6 |
Sapphire | Pure Black X58 | -- | 1 x Marvell Yukon | FOG 0.32 | 2013-12-14 | kernel arguments (maybe not necessary) acpi=off irqpoll vga=6 |
Virtual Machines
Manufacturer | Model | BIOS Version | Onboard NIC | Kernel Version | Date | Notes |
---|---|---|---|---|---|---|
Proxmox VE 3.1 | KVM virtual machine | Seabios 1.7.4 | 1 x Intel E1000 | FOG 0.32 | 2014-01-04 | VM CPU=Nehalem (not working with CPU=Host), kernel arguments (maybe not necessary) acpi=off irqpoll vga=6 |
Sun | xVM Virtualbox | -- | -- | 2009-05-12 | -- | |
Sun | VMware WorkStation | ✓ | Default bzImage | 2014-06-13 | -- |