Cisco Multi Cast

Cisco Multicast Configuration - Layer 3

Overview

Components Used

1. Fog server running version 0.29
2. Cisco Catalyst 3560G switch runs Cisco IOS software C3560-ipservicesk9-m version 12.2(53)SE2
3. 2 PCs

Setup

1. FOG server on vlan 50 with IP address 10.2.50.70
2. 2 PC on vlan 130 with IP address lease from DHCP running on FOG server

Cisco IOS Commands

ip multicast-routing distributed
interface Vlan50
 ip pim sparse-dense-mode
!
interface Vlan130
 ip pim sparse-dense-mode
!

Complete Basic config.text

The output below was dumped with

Switch # sh run 

version 12.2
!
ip multicast-routing distributed
vlan 50
 name server
!
vlan 130
 name client
!
interface GigabitEthernet0/1
 switchport access vlan 50
 switchport mode access
 spanning-tree portfast
!
interface GigabitEthernet0/2
 switchport access vlan 130
 switchport mode access
 spanning-tree portfast
!
interface GigabitEthernet0/3
 switchport access vlan 130
 switchport mode access
 spanning-tree portfast
!
interface Vlan50
 ip address 10.2.50.1 255.255.255.0
ip pim sparse-dense-mode
!
interface Vlan130
 ip address 10.2.130.1 255.255.255.0
 ip helper-address 10.2.50.70
ip pim sparse-dense-mode
!
end