Upgrade to trunk

Methods

• There are a few methods to update to the most resent revision.

SVN

• Install as seen in SVN

svn co https://svn.code.sf.net/p/freeghost/code/trunk /some/local/folder

• Then navigate to the folder you specified and run:

sudo /some/local/folder/bin/./installfog.sh

Update from prior downloaded SVN

cd  /some/local/folder/
svn up
cd bin
./installfog.sh

---

BTSync

If you want the latest, get on the BTsync :) You could have changes within 20-30 seconds of them being made.

Fog Read only Secret: BAU3NUY3XTKVMHHEZO6C7OH55AN2PCGJV
Kernels Read only Secret: B7AGQ6JVIP4MF5LCRL3XURQBYC53UIS25

• Create the location that you want to have synced.

sudo mkdir /fog
sudo mkdir /kernels
sudo chrmod 777 /fog
sudo chrmod 777 /kernels

• Install BTsync:

sudo add-apt-repository ppa:tuxpoldo/btsync
sudo apt-get update
sudo apt-get install btsync
cd Downloads
tar xzpf btsync_i386.tar.gz (I have downloaded 32 bit. So check your version)
./btsync

• Open a webpage: <IP Address>:8888

Add Folder:
Secret: BAU3NUY3XTKVMHHEZO6C7OH55AN2PCGJV
Path: /fog

Add Folder:
Secret: B7AGQ6JVIP4MF5LCRL3XURQBYC53UIS25
Path: /kernels

• Then Any time you see an update. Open up your terminal:

cd /fog/bin/
sudo ./installfog.sh

And you are updated quite quickly!

~Sources: [AskUbuntu]

---

wget

wget --no-check-certificate http://mastacontrola.com/fog_trunk.tar.bz2

• Once downloaded you'll need to unpack the bz2 file using the command:

tar -xjf fog_trunk.tar.bz2

• Then go into the unextracted file. Follow these steps:

  cd fog_trunk/bin
  ./installfog.sh