Build TomElliott Kernel

PRE BUILD ENVIRONMENT IS ASSUMED ALREADY INSTALLED ON THE SYSTEM YOU'RE BUILDING NOTE: It is assumed you have root access to the system you're building this on. It also assumes you know your CWD (Current Working Directory).

Build TomElliott Kernel for FOG 0.32 and earlier

The below instructions are to build the TomElliott kernel. There is an extra step involved compared to the normal kernel build as there are firmware's built directly into the kernels now.

Download the Kernel

As of the time of this writing kernel 3.13 is the latest. You can use previous, or future kernels as well though.

wget https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.13.tar.xz

Uncompress the kernel

tar -xf linux-3.13.tar.xz

Go into uncompressed linux kernel directory

cd linux-3.13

Get the config file

wget https://svn.code.sf.net/p/freeghost/code/trunk/kernel/TomElliott.config.32 -O .config

Download the prerequisite package (THE EXTRA STEP IS HERE)

git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git

Prepare the build

make ARCH=i386 menuconfig

Add any choices, or don't but when you exit, it will ask you to save the config, NEEDED.

After you've saved the config.

Build the bzImage

make ARCH=i386 bzImage

This will take a while. Once successful, it will say bzImage created.

Copy the built kernel to your FOG Server's kernel directory.

NOTE: In my example, the FOG Server is the same as my build system. NOTE: Recommend to make a backup of the original /tftpboot/fog/kernel/bzImage before continuing just in case.

cp arch/x86/boot/bzImage /tftpboot/fog/kernel/bzImage

Build TomElliott Kernel for FOG 0.33b and newer

The below instructions are to build the TomElliott kernel. There is an extra step involved compared to the normal kernel build as there are firmware's built directly into the kernels now.

Download the Kernel

As of the time of this writing kernel 4.17 is the latest. You can use previous, or future kernels as well though.

wget https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.17.tar.xz

Uncompress the kernel

tar -xf linux-4.17.tar.xz

Go into uncompressed linux kernel directory

cd linux-4.17

Get the config file

To Build 32 bit Kernel

wget -O .config https://github.com/FOGProject/fos/raw/master/configs/kernelx86.config

To Build 64 bit Kernel

wget -O .config https://github.com/FOGProject/fos/raw/master/configs/kernelx64.config

Download the prerequisite package (THE EXTRA STEP IS HERE)

git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git

Prepare the build

To Build 32 bit Kernel

make ARCH=i386 oldconfig

To Build 64 bit Kernel

NOTE: MUST BE ON A 64 BIT OS

make oldconfig

In case you want to make changes to the config run:

make ARCH=i386 menuconfig

or

make oldconfig

Make sure to save when exiting the menuconfig.

Build the bzImage

To Build 32 bit Kernel

make ARCH=i386 bzImage

To Build 64 bit Kernel

make bzImage

This will take a while. Once successful, it will say bzImage created.

Copy the built kernel to your FOG Server's kernel directory.

NOTE: In my example, the FOG Server is the same as my build system. NOTE: Recommend to make a backup of the original /var/www/html/fog/service/ipxe/bzImage before continuing just in case.

cp arch/x86/boot/bzImage /var/www/html/fog/service/ipxe/bzImage

or

cp arch/x86/boot/bzImage /var/www/html/fog/service/ipxe/bzImage32

Additional Patches

Edit the files within the linux decompressed folder:

drivers/net/usb/r8152.c

Search for

REALTEK_USB_DEVICE(VENDOR_ID_REALTEK

and add this line:

    {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)}

drivers/scsi/storvsc_drv.c

This is an important patch to help prevent from major performance issues in HyperV: https://forums.fogproject.org/topic/6695/performance-decrease-using-hyper-v-win10-clients

Search for

blk_queue_virt_boundary

Delete the line and add:

    if (PAGE_SIZE - 1 < 4096) {
        blk_queue_virt_boundary(sdevice->request_queue, 4096);
    } else {
        blk_queue_virt_boundary(sdevice->request_queue, PAGE_SIZE - 1);
    }

drivers/net/ethernet/intel/igb/e1000_82575.c

Search for

E1000_STATUS_FUNC_SHIFT;

Directly after the line add:

    igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, 0);