Change FOG Server IP Address

Change FOG server static IP address

FOG 1.3.0

For static addresses

Fedora:

CentOS 7:

Ubuntu:

FOR DHCP Addresses

Change the DHCP Reservation for the fog server, based on the FOG Server's MAC address and the IP you want it to have.

FOG Settings

Change the /opt/fog/.fogsettings file to have the correct IP address. Re-run the installer. Update your storage node's IP settings.

Older instructions

FOG server setup

• Fedora 10
• SVN of version 0.27
• IP address:192.168.1.200 (using network manager)
• Change computer IP address from 192.168.1.200 to 192.168.1.50

Change FOG server settings

• Cancel any pending upload/deploy tasks Tasks > Active Tasks (Previous IP settings are embedded in task info)
• Log in to FOG WebUI > about > FOG Settings
  • General Setting: FOG_WOL_HOST
  • TFTP Server: FOG_TFTP_HOST, FOG_PXE_IMAGE_DNSADDRESS
  • WEB Server: FOG_WEB_HOST
• FOG WebUI > about > PXE Boot Menu > Save PXE Menu
• FOG WebUI > Storage Management > All Storage Nodes
  • DefaultMember: IP Address
• DHCP server configuration file (/etc/dhcpd.conf) restart service after changes are made.
  • Next-server 192.168.1.50
• PXE Menu changes ( /tftpboot/pxelinux.cfg/default)
  • Replace any previous IP addresses with new IP address
  • This also applies if your DNS server has changed. You would replace all previous DNS IP addresses with new DNS server IP address.
  • Example (no change to DNS):
    • Old line in /tftpboot/pxelinux.cfg/default:
      • append initrd=fog/images/init.gz root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=192.168.1.1 mode=quickimage keymap= web=192.168.1.200/fog/ loglevel=4 consoleblank=0
    • New line in /tftpboot/pxelinux.cfg/default:
      • append initrd=fog/images/init.gz root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=192.168.1.1 mode=quickimage keymap= web=192.168.1.50/fog/ loglevel=4 consoleblank=0