Troubleshoot Web Interface

From FOG Project
Jump to: navigation, search

Page under construction. Below you'll find notes that are being collected to make into an article.

Fatal error: Allowed memory size of xxxxxxxx bytes exhausted

Reference: Fog Version 5507 Cannot Access Host Management

Solution: Raise the web interface's memory limit: FOG Configuration -> FOG Settings -> General Settings -> FOG_MEMORY_LIMIT

It’s done in megs, so 128 = 128M, 256 = 256M etc…

Manually test WOL

This is the web address to manually test FOG's WOL functionality:

http://x.x.x.x/fog/management/index.php?sub=wakeEmUp&mac=aa:bb:cc:dd:ee:ff

Where x.x.x.x is your FOG server's IP address, and aa:bb:cc:dd:ee:ff is the MAC address of the host you wish to wake up.

For instance, if my FOG server's IP is 10.0.0.7 and the target host's MAC is 14:fe:b5:df:fc:7e I would then put the below web address into the address bar of a web browser and then press enter / click go.

[1]

After doing this, the target host will be sent a WOL packet from the FOG server.