Include any ISO in the FOG Bootmenu

From FOG Project
Revision as of 17:44, 17 January 2016 by Wayne-workman.28155 (talk | contribs) (→‎Newer (January 2016))
Jump to: navigation, search

View the contents of the boot menu

Where x.x.x.x is the FOG server's IP address, put this into a browser's address bar: 

x.x.x.x/fog/service/ipxe/boot.php

PartedMagic

Newer (January 2016)

Note: These steps are intended for 1.2.0,but can be adapted to 1.3.0 very easily. These steps assume you have a fully functional FOG 1.2.0 server.

Copy your Parted magic into this directory: Note: Replace the ISO name with your ISO's actual name, it's case sensitive.

/images/pmagic_iso/YourIsoNameGoesHere.iso

Now, you must mount your iso to a directory called /images/pmagic To do this perminantly, edit the fstab file

Copy the below list of files from the ISO into this web directory /var/www/html/fog/service/ipxe/pmagic/

You'll need to create the pmagic directory: 

mkdir /var/www/html/fog/service/ipxe/pmagic
  • bzimage
  • initrd.img
  • files.cgz
  • fu.img
  • m32.img

After copying the above files to the above specified directory, you'll need to set ownership and permissions so that they are accessible via HTTP (for Red Hat, Cent OS 7, Fedora 19+): 

chown -R apache:apache /var/www/html/fog/service/ipxe/pmagic
chmod -R 744 /var/www/html/fog/service/ipxe/pmagic


These are your iPXE menu additions 

set nfs_path /images/pmagic
kernel http://${fog-ip}/fog/service/ipxe/pmagic/bzImage
initrd http://${fog-ip}/fog/service/ipxe/pmagic/initrd.img
initrd http://${fog-ip}/fog/service/ipxe/pmagic/files.cgz
initrd http://${fog-ip}/fog/service/ipxe/pmagic/fu.img
initrd http://${fog-ip}/fog/service/ipxe/pmagic/m32.img
imgargs bzImage root=/dev/nfs boot=live netboot=nfs nfsroot=${fog-ip}:${nfs_path} ip=dhcp edd=on noapic load_ramdisk=1 prompt_ramdisk=0 rw vga=normal sleep=0 loglevel=0 keymap=us splash quiet - || read void
boot || read void
prompt
goto start

Reference

Integrating PartedMagic in Fog 1.2.0

Older

Note: Original steps intended for 1.2.0 and below. 1.3.0 would use the web interface to create a custom boot menu item and would not require file editing at the OS level. Original instructions below have been left intact.

In this example I will use the PartedM agic ISO, but Clonezilla, Linux distributions, Hirens Boot CD, and other bootable ISO's can be used.

Create a folder in /tftpboot/fog/ called partedmagic, copy the partedmagic.iso file into this folder and also copy and paste the MemDisk file found in /tftpboot/fog/

Browse to /tftpboot/pxelinux.cfg/ and edit the 'default' file in there and add: 


LABEL PartedMagic
        kernel fog/partedmagic/memdisk 
        append iso initrd=fog/partedmagic/partedmagic.iso raw
        MENU PartedMagic
        TEXT HELP
        Gparted + Clonezilla + Firefox
        ENDTEXT

You can also see this forum post for more instruction - [1]

Please remember that if you create a new folder in the /tftpboot directory you will also need to include MemDisk in the same folder! The link above also includes a TFTP folder you can use to try on your own. It includes DBAN and Dell diagnostics's .ISO's.

Note: In FOG 1.3.0+, the MemDisk kernel is included as a default unless specified otherwise.

DBAN

This is a guide for adding Darik's Boot and Nuke (DBAN) to FOG 1.3.0. While following the below tutorial, please keep in mind that everything in Linux is case sensitive.

Backend

For this example, we will be using Fedora 21 Server; these commands should work for CentOS and RHEL as well. For Debian/Ubuntu based distributions you should only need to change the web directory paths to (maybe?) exclude the /html part.

Please note that the below wget URL will likely need updated to a current URL for the latest DBAN ISO.


Here is a step-by-step explanation of what the below commands do:

  • Make a directory in the root directory called "iso."
  • Make a directory in the web folder called "dban."
  • Get the latest copy of dban using wget (URL likely needs updated) and put it into the "iso" directory with the name "dban.iso."
  • Mount the dban.iso file to the "dban" web directory as read-only (must be read only for ISOs).


These commands are executed on your FOG server via CLI with sudo or root permissions: 

mkdir /iso
mkdir /var/www/html/dban
wget -O /iso/dban.iso http://downloads.sourceforge.net/project/dban/dban/dban-2.3.0/dban-2.3.0_i586.iso
mount -t iso9660 -o loop /iso/dban.iso /var/www/html/dban


If you've done the steps above correctly, you should be able to visit the directory in a web browser like so to see the files inside the ISO: 

x.x.x.x/dban

Frontend

Now we must add a new entry to the FOG boot menu. For this, we will navigate in the FOG web UI to here:

FOG Configuration -> iPXE New Menu Entry

In this menu, you will add the below information.


Menu Item: DBAN

Description: Boot and nuke (This is what the menu displays)

Parameters: 

:DBAN
kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke" silent vga=785
boot


Menu Show with: All Hosts


It should look something like this when you're done:

DBAN 1.3.0.png

NOTE: You don't change the {boot_url} part, it's an environment variable.

NOTE: Some have reported that this works for them without the double quotes around this part: dwipe --autonuke but you may not have this problem.

Other Parameter Options

autonuke 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke" silent nousb vga=785

dban 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe" silent vga=785

dod 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke --method dod522022m" silent vga=785

dod3pass 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke --method dod3pass" silent vga=785

dodshort 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke --method dodshort" silent vga=785

gutmann 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke --method gutmann" silent vga=785

ops2 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke --method ops2" silent vga=785

paranoid 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke --method prng --rounds 8 --verify all" silent vga=785

prng 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke --method prng --rounds 8" silent vga=785

quick 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke --method quick" silent vga=785

zero 

kernel ${boot_url}/dban/dban.bzi nuke="dwipe --autonuke --method zero" silent vga=785


Resources

https://forums.fogproject.org/topic/4069/fog-1-2-0-dban-advanced-pxe-boot-menu

http://www.dban.org/

Hirens 15.04

Note: Applies to FOG 1.3.0 (Fog Trunk)

First in your /etc/exports add this line: 

/var/www/fog/iso/15.04_64 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)

Then restart NFS. [NFS Service CLI Controls]

Next, extract the Ubuntu ISO to a directory named 15.04_64 in your /var/www/fog/iso directory.

In your Advanced menu use this: 

:MENU
menu
item --gap – ---------------- iPXE boot menu ----------------
item ubuntu15.04_64 Boot Ubuntu 15.04
item return return to previous menu
:ubuntu15.04_64
set path /fog/iso/15.04_64
set nfs_path /var/www/fog/ISO/15.04_64
kernel http://${fog-ip}${path}/casper/vmlinuz.efi || read void
initrd http://${fog-ip}${path}/casper/initrd.lz || read void
imgargs vmlinuz.efi root=/dev/nfs boot=casper netboot=nfs nfsroot=${fog-ip}:${nfs_path} ip=dhcp splash quiet – || read void
boot || read void
goto start

You don’t have to set the variables. I just did it that way in case I ever have to change where the ISO directory lives.

Retrieved from "https://wiki.fogproject.org/wiki/index.php?title=Include_any_ISO_in_the_FOG_Bootmenu&oldid=11308"