ProCurve Wake on lan

From FOG Project
Revision as of 20:38, 18 December 2010 by Sbouchertolland (talk | contribs) (Components Used)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

ProCurve - Wake On Lan VLan Interface Configuration

Overview

Components Used

  1. FOG server running version 0.29
  2. ProCurve 5406zl switch running slightly outdated fw revision K.13.51 with premium Edge licensing
  3. PC with BIOS setup with Wake-on-Lan

Setup

  1. FOG server on vlan 2 with IP address 10.0.1.13
  2. PC on vlan 5 with IP address lease from DHCP running on standalone DHCP server

ProCurve CLI commands

ip directed-broadcast
ip udp-bcast-forward
vlan 2
 ip address 10.0.1.2 255.255.255.0
 ip forward-protocol udp 10.0.16.255 9
vlan 5
 ip address 10.0.16.2 255.255.255.0