Template:Testing your installation

From FOG Project
Revision as of 01:19, 30 July 2012 by Chad-bisd (talk | contribs) (Initial creation: moving this to a template because it could be reused in various installation articles but is non-specific enough to allow transclusion)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Now that everything is installed, you will need a client to test your installation.

  1. On a client, change the boot order to boot from network or PXE boot as the first boot device.
  2. You may also need to enable network booting in some BIOSes
  3. Boot up the computer and you should see the FOG boot menu that will give you a few options
  4. select memory test and if memtest loads you should be ready to run!
Retrieved from "https://wiki.fogproject.org/wiki/index.php?title=Template:Testing_your_installation&oldid=7673"