Difference between revisions of "Cisco Wake on lan"

From FOG Project
Jump to: navigation, search
(Created page with '==Cisco - Wake On Lan VLan Interface Configuration - Layer 3== === Overview === ====Components Used==== #FOG server running version 0.29 #Cisco Catalyst 3560G switch runs Cis…')
 
(No difference)

Latest revision as of 15:32, 20 May 2010

Cisco - Wake On Lan VLan Interface Configuration - Layer 3

Overview

Components Used

  1. FOG server running version 0.29
  2. Cisco Catalyst 3560G switch runs Cisco IOS software C3560-ipservicesk9-m version 12.2(53)SE2
  3. PC with BIOS setup with Wake-on-Lan

Setup

  1. FOG server on vlan 50 with IP address 10.2.50.70
  2. PC on vlan 130 with IP address lease from DHCP running on FOG server

Cisco IOS Commands

ip forward-protocol udp discard
access-list 101 permit udp host 10.2.50.70 any eq 9
interface Vlan50
 ip address 10.2.50.1 255.255.255.0
 ip helper-address 10.2.130.255

interface Vlan130
 ip address 10.2.130.1 255.255.255.0
 ip helper-address 10.2.50.35
 ip directed-broadcast 101

Complete Basic config.text

The output below was dumped with

Switch # sh run 
Cisco switch config 
hostname Switch
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
system mtu routing 1500
vtp domain Cisco
vtp mode transparent
authentication mac-move permit
ip subnet-zero
ip routing   
vlan internal allocation policy ascending
!
vlan 50
 name server
!
vlan 130
 name client
!
interface GigabitEthernet0/1
 switchport access vlan 50
 switchport mode access
 spanning-tree portfast
!
interface GigabitEthernet0/2
 switchport access vlan 130
 switchport mode access
 spanning-tree portfast
!
interface Vlan50
 ip address 10.2.50.1 255.255.255.0
 ip helper-address 10.2.130.255
!
interface Vlan130
 ip address 10.2.130.1 255.255.255.0
 ip helper-address 10.2.50.70
 ip directed-broadcast 101  
ip forward-protocol udp discard
access-list 101 permit udp host 10.2.50.70 any eq discard
!
end