Difference between revisions of "Troubleshoot NFS"

From FOG Project
Jump to: navigation, search
(NFS & RPC Service)
(Ubuntu: Added proper RPC service commands for Ubuntu.)
Line 130: Line 130:
 
<pre>update-rc.d nfs-kernel-server defaults</pre>
 
<pre>update-rc.d nfs-kernel-server defaults</pre>
  
 +
RPC status:
 +
<pre>sudo service rpcbind status</pre>
  
portmap Status:
+
Restart RPC:
<pre>code here</pre>
+
<pre>sudo service rpcbind restart</pre>
  
Restart portmap:
+
Enable RPC on boot:
<pre>code here</pre>
+
<pre>update-rc.d rpcbind defaults</pre>
 
 
Enable portmap on boot:
 
<pre>code here</pre>
 
  
 
== NFS Settings File ==
 
== NFS Settings File ==

Revision as of 16:55, 8 June 2015


NFS's roles in FOG

NFS is used to transfer images to and from clients in FOG, and is used on both the client and server. The server's setting file controls what files & directories are exported, and their options. NFS allows writing to the /images/dev directory and allows reading from the /images directory. During imaging, the client mounts either /images/dev (for uploading or capturing an image) or /images (for downloading or deploying an image).

During upload/capture, NFS uploads images to: /images/dev/<MAC Address Of Client>

During download/deployment, NFS downloads images from: /images/<Image Path>

Please note that FTP is used to move images from /images/dev to /images.

Testing NFS

Using a FOG debug deployment for testing (easy & quick way)

The first thing we must do is create a test file that we use to test with. On your FOG server:

echo 'This is the text I use to test with.' > /images/test.txt


Select the problematic client from your Hosts list in the web UI, Choose "Basic Tasks", then pick download. Create an immediate debug task. See picture below:

Debug Download Task.png


At the client, if it did not WOL, turn it on. After the client shows options on the screen, you can press [enter] to be given a command prompt.

You first need to create two directories to mount to:

mkdir /images
mkdir /images/dev


Next, we will mount to FOG's remote image directories like this:

mount -o nolock,proto=tcp,rsize=32768,intr,noatime $storage /images
mount -o nolock,proto=tcp,rsize=32768,intr,noatime 10.0.0.3:/images/dev/ /images/dev


Next, we will execute a command that will test download and upload at the same time. We will attempt to read /images/test.txt and write that file to /images/dev/test.txt

cp /images/test.txt /images/dev/test.txt

If you recieved no errors, you're probably good to go. You can confirm all went well by looking at the contents of the moved file:

cat /images/dev/test.txt



Using a separate Linux machine for testing (hard & long way)

below r3472 (1.2.0 is below r3472)

inside /etc/exports on the FOG server, Set the fsid for /images to 0 and /images/dev to 1

sudo vi /etc/exports

instructions on using Vi: Vi

Save that, exit that, then run this:

exportfs -a

Restart NFS and RPC (see services below)

After restarting NFS and RPC, proceed to the steps below just below:

r3473 and above

The first thing we must do is create a test file that we use to test with. On your FOG server:

echo 'This is the text I use to test with.' > /images/test.txt

At the CLI of the separate Linux machine:

Create local directories

mkdir /images
mkdir /images/dev

You can configure the mounts for the /images and the /images/dev directories of your FOG server on your separate Linux machine by executing these two commands:

mount 10.0.0.3:/images /images
mount 10.0.0.3:/images/dev /images/dev


Next, we will execute a command that will test download and upload at the same time. We will attempt to read /images/test.txt and write that file to /images/dev/test.txt

cp /images/test.txt /images/dev/test.txt

If you recieved no errors, you're probably good to go. You can confirm all went well by looking at the contents of the moved file:

cat /images/dev/test.txt

NFS & RPC / Portmap Service

Fedora 20/21

NFS Status:

systemctl status nfs-server
(should be on and green, no errors, and enabled)

The restart command is most useful, if any errors are encountered during manual start/restart, they are displayed.

systemctl restart nfs-server

Enable NFS on boot:

systemctl enable nfs-server


RPC Status:

systemctl status rpcbind

Restart RPC:

systemctl restart rpcbind

Enable RPC on boot:

systemctl enable rpcbind

Ubuntu

NFS status:

sudo service nfs-kernel-server status

The restart command is most useful, if any errors are encountered during manual start/restart, they are displayed.

sudo service nfs-kernel-server restart

Enable on boot:

update-rc.d nfs-kernel-server defaults

RPC status:

sudo service rpcbind status

Restart RPC:

sudo service rpcbind restart

Enable RPC on boot:

update-rc.d rpcbind defaults

NFS Settings File

The primary NFS settings file is located here:

/etc/exports


On a standard FOG install where everything is self-contained on one system, it should look like this:

/images *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=0)
/images/dev *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1)

Creating & verifying .mntcheck files

.mntcheck is a hidden and empty file that a FOG client uses during image upload/capture and image download/deployment to verify an NFS share is mounted correctly.


To create these files, on the FOG server:

touch /images/.mntcheck
touch /images/dev/.mntcheck

Verify these files with:

ls -laR /images | grep .mntcheck

This should return two results. One for /images and one for /images/dev

Disable & Verify Firewall

Fedora 20/21/22/23

Disable/stop Firewall

systemctl disable firewalld.service
systemctl stop firewalld.service

Can be undone with "start" and "enable".

Check Firewall in Fedora 20/21/22/23

systemctl status firewalld.service

Fedora 16

Add /bin/bash to /etc/shells as the vsftpd yum install does not do it correctly causing tftp timeout message


Debian/Ubuntu

sudo iptables -L

If disabled, the output should look like this:

Chain INPUT (policy ACCEPT)
target prot opt source destination 

Chain FORWARD (policy ACCEPT)
target prot opt source destination 

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

Disable Ubuntu Firewall

sudo ufw disable

Disable Debian Firewall

iptables -F
iptables -X
iptables -t nat -F
iptables -t nat -X
iptables -t mangle -F
iptables -t mangle -X
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT
iptables -P FORWARD ACCEPT

Other debian settings:

/etc/hosts.deny

This setting in the above file will deny traffic from any source except locally:

ALL:ALL EXCEPT 127.0.0.1:DENY

Comment out this line like so:

#ALL:ALL EXCEPT 127.0.0.1:DENY

Windows 7

Start -> Control Panel -> View by "Small icons" -> Windows Firewall -> Turn Windows Firewall On or Off -> Turn off all three.

Configuring firewall on Linux

To set the firewall for Linux to only allow what is necessary, please see the FOG security article.


Permissions

For the purposes of this article (troubleshooting), the /images directory should have 777 permissions set recursively.

You can do that like this:

chmod -R 777 /images

Common problems and fixes

My problem isn't in the WiKi!

If you have a problem with FOG, or have a solution to a problem with FOG, please visit the forums for help or to report your solution. We try to keep the WiKi updated with things found in the forum. You can visit the forum here: FOG Forums



Image Upload: Error Checking Mount

Please see Image Capture: Error Checking Mount