Difference between revisions of "Use FOG with FreeNAS"

From FOG Project
Jump to: navigation, search
m (Changed terminology to use capture instead of upload.)
 
(26 intermediate revisions by 2 users not shown)
Line 2: Line 2:
 
== How to: Use FOG (1.1.2) with FreeNAS (Storage node - 9.1.1) ==
 
== How to: Use FOG (1.1.2) with FreeNAS (Storage node - 9.1.1) ==
  
 
+
*I have often seen people want to use Fog Server with a Storage Node FreeNAS. At my office, it works so i describe you step by step how to do.
 
 
I have often seen people want to use Fog Server with a Storage Node FreeNAS. At my office, it works so i describe you step by step how to do.
 
 
There are probably several solutions i think, but i propose you a simple solution that works with me.
 
There are probably several solutions i think, but i propose you a simple solution that works with me.
  
 +
I* consider that your FreeNAS is ok for the installation and NIC.
  
I consider that your FreeNAS is ok for the installation and NIC.
+
===Pre-Configuration===
 +
*IP Addresses (These are not required but set as example)
 +
**Fog Server: 192.168.56.102
 +
**FreeNAS: 192.168.56.240
  
Fog Server: 192.168.56.102
+
==='''FOG Server'''===
  
FreeNAS: 192.168.56.240
+
#'''Storage Management'''
 +
#*Add the Storage node.
 +
#*Storage Node Name: FNAS
 +
#*IP Address: 192.168.56.240
 +
#*Is Master Node: As you want.
 +
#*Group: As you want.
 +
#*Image Path: /mnt/Volume1/data/images
 +
#*User/Pass: Free/Free (Not very secure ;) )
 +
#'''Image Management'''
 +
#*For your image, choose the storage group witch contains the new storage node.
  
 +
==='''FreeNAS'''===
  
'''FOG Server:'''
+
#'''Add Volume1'''
 +
#*Storage -> ZFS Volume Manager:
 +
#*Volume Name: Volume1
 +
#*Volume layout: All the disk (in my case)
 +
#'''Create the path'''
 +
#*Clic on Volume1 -> Create ZFS Dataset:
 +
#*Dataset Name: data
 +
#*Compression level: inherit
 +
#*Enable atime: inherit
 +
#*ZFS Deduplication: inherit
 +
#*Clic on data -> Create ZFS Dataset:
 +
#*Dataset Name: images
 +
#*Compression level: inherit
 +
#*Enable atime: inherit
 +
#*ZFS Deduplication: inherit
 +
#*Clic on images -> Create ZFS Dataset:
 +
#*Dataset Name: dev
 +
#*Compression level: inherit
 +
#*Enable atime: inherit
 +
#*ZFS Deduplication: inherit
 +
#*[[File:FreeNAS DirectoryStructure.png|border]]
 +
#'''Create .mntcheck'''
 +
#*On the folder "/images" and "/dev", create the file ".mntcheck"
 +
#*CMD: touch .mntcheck
 +
#'''Create new user'''
 +
#*Account -> Users -> Add User
 +
#*Username: Free
 +
#*Primary Group ID: Free
 +
#*Home Directory: /mnt/Volume1/data/images
 +
#*Home Directory Mode: 777
 +
#*[[File:FreeNAS User.png|border]]
 +
#'''Permission for the path'''
 +
#*Storage -> clic on data/images -> Change Permissions
 +
#*User: Free
 +
#*group: Free
 +
#*Mode: 777
 +
#*Type of ACL: Unix
 +
#*Set Permission recursively: YES
 +
#*Verification: cmd: ls -laR /mnt/Volume1/data/images
 +
#'''NFS'''
 +
#*Don't edit "/etc/exports". In my case, when i restart the service, the file faded. I had to WEBGui.
 +
#*On the left.
 +
#*Sharing -> Inux (NFS) Shares -> Add Unix (NFS) Share.
 +
#*Comment:...
 +
#*Authorized networks: 192.168.56.0/24
 +
#*All directories: OK
 +
#*Maproot User: Free
 +
#*Maproot Group: Free
 +
#*Path: /mnt/Volume1/data/images
 +
#*OK.
 +
#*[[File:FreeNAS NFS.png|border]]
 +
#*
 +
#*Idem for the folder "/dev"
 +
#*
 +
#*[[File:FreeNAS dev.png|border]]
 +
#*Verification:
 +
#*cmd: cat /etc/exports
 +
#*[[File:FreeNAS Exports.png|border]]
 +
#'''FTP (I don't know if it's really necessary)'''
 +
#*Services -> FTP -> Advenced Mode
 +
#*Path: /mnt/Volume1/data/images
 +
#*File Permission: 666
 +
#*Directory Permission: 777
  
 +
===Capturing Image===
  
Step 1: Storage Management
+
*Now: you can capture your client
 +
*Problem, you may also get an error message at the end: FOGFTP: failed to rename file.
 +
**http://www.fogproject.org/wiki/index.php/Images_Directory_Permissions
  
Add the Storage node.
+
*Method 1 doesn't works with me, so i use method 2. [[Use_FOG_with_FreeNAS#Notes:|*]]
 +
*[[File:FreeNAS FTP Will Not Rename And Move.png|border]]
 +
*CMD: cp -a /mnt/Volume1/data/image/dev/@MAC /mnt/Volume1/data/images/NameOfYourImage
 +
*cp -a to keep the same permission.
  
Storage Node Name: FNAS
 
  
IP Address: 192.168.56.240
+
*'''That's it.'''
  
Is Master Node: As you want.
+
== Notes: ==
 
 
Group: As you want.
 
 
 
Image Path: /mnt/Volume1/data/images
 
 
 
User/Pass: Free/Free (Not very secure ;) )
 
 
 
 
 
Step 2: Image Management
 
 
 
For your image, choose the storage group witch contains the new storage node.
 
 
 
 
 
'''FreeNAS:'''
 
 
 
 
 
Step 1: Add Volume1
 
 
 
Storage -> ZFS Volume Manager:
 
 
 
Volume Name: Volume1
 
 
 
Volume layout: All the disk (in my case)
 
 
 
Step 2: Create the path
 
 
 
Clic on Volume1 -> Create ZFS Dataset:
 
 
 
Dataset Name: data
 
 
 
Compression level: inherit
 
 
 
Enable atime: inherit
 
 
 
ZFS Deduplication: inherit
 
 
 
 
 
Clic on data -> Create ZFS Dataset:
 
 
 
Dataset Name: images
 
 
 
Compression level: inherit
 
 
 
Enable atime: inherit
 
 
 
ZFS Deduplication: inherit
 
  
 +
*This tutorial was created using content from this thread: [http://fogproject.org/forum/threads/how-to-use-fog-1-1-2-with-freenas-storage-node-9-1-1.12821/ How to: Use FOG (1.1.2) with FreeNAS (Storage node - 9.1.1)]
  
Clic on images -> Create ZFS Dataset:
+
* '''*''' Further investigation into the "FOGFTP: failed to rename file". This is most likely a permissions issue that needs to be corrected. (FOG Dev Team)
 
 
Dataset Name: dev
 
 
 
Compression level: inherit
 
 
 
Enable atime: inherit
 
 
 
ZFS Deduplication: inherit
 
 
 
 
 
[[File:FreeNAS DirectoryStructure.png]]
 
 
 
 
 
Step 3: Create .mntcheck
 
 
 
 
 
On the folder "/images" and "/dev", create the file ".mntcheck"
 
 
 
CMD: touch .mntcheck
 
 
 
 
 
 
 
 
 
Step 4: Create new user.
 
 
 
Account -> Users -> Add User
 
 
 
Username: Free
 
 
 
Primary Group ID: Free
 
 
 
Home Directory: /mnt/Volume1/data/images
 
 
 
Home Directory Mode: 777
 
 
 
 
 
[[File:FreeNAS User.png]]
 
 
 
 
 
Step 5: Permission for the path
 
 
 
Storage -> clic on data/images -> Change Permissions
 
 
 
User: Free
 
 
 
group: Free
 
 
 
Mode: 777
 
 
 
Type of ACL: Unix
 
 
 
Set Permission recursively: YES
 
 
 
 
 
Verification: cmd: ls -laR /mnt/Volume1/data/images
 
 
 
 
 
Step 6: NFS
 
 
 
Don't edit "/etc/exports". In my case, when i restart the service, the file faded. I had to WEBGui.
 
 
 
On the left.
 
 
 
Sharing -> Inux (NFS) Shares -> Add Unix (NFS) Share.
 
 
 
Comment:...
 
 
 
Authorized networks: 192.168.56.0/24
 
 
 
All directories: OK
 
 
 
Maproot User: Free
 
 
 
Maproot Group: Free
 
 
 
Path: /mnt/Volume1/data/images
 
 
 
 
 
OK.
 
 
 
[[File:FreeNAS NFS.png]]
 
 
 
Idem for the folder "/dev"
 
 
 
[[File:FreeNAS dev.png]]
 
 
 
Verification:
 
 
 
cmd: cat /etc/exports
 
 
 
[[File:FreeNAS FTP Will Not Rename And Move.png]]
 
 
 
 
 
Step 7: FTP (I don't know if it's really necessary)
 
 
 
Services -> FTP -> Advenced Mode
 
 
 
Path: /mnt/Volume1/data/images
 
 
 
File Permission: 666
 
 
 
Directory Permission: 777
 
 
 
 
 
Now: you can upload your client.
 
 
 
Problem, you may also get an error message at the end: FOGFTP: failed to rename file.
 
 
 
http://www.fogproject.org/wiki/index.php/Images_Directory_Permissions
 
 
 
Method 1 doesn't works with me, so i use method 2.
 
 
 
[[File:FreeNAS FTP Will Not Rename And Move.png]]
 
 
 
CMD: cp -a /mnt/Volume1/data/image/dev/@MAC /mnt/Volume1/data/images/NameOfYourImage
 
 
 
cp -a to keep the same permission.
 
 
 
That's it. If I have forgotten nothing, you can use FreeNAS with FOG Server :)
 
 
 
 
 
 
 
== Notes: ==
 
 
 
This tutorial was created using content from this thread: [http://fogproject.org/forum/threads/how-to-use-fog-1-1-2-with-freenas-storage-node-9-1-1.12821/ How to: Use FOG (1.1.2) with FreeNAS (Storage node - 9.1.1)]
 

Latest revision as of 04:42, 8 July 2016

How to: Use FOG (1.1.2) with FreeNAS (Storage node - 9.1.1)

  • I have often seen people want to use Fog Server with a Storage Node FreeNAS. At my office, it works so i describe you step by step how to do.

There are probably several solutions i think, but i propose you a simple solution that works with me.

I* consider that your FreeNAS is ok for the installation and NIC.

Pre-Configuration

  • IP Addresses (These are not required but set as example)
    • Fog Server: 192.168.56.102
    • FreeNAS: 192.168.56.240

FOG Server

  1. Storage Management
    • Add the Storage node.
    • Storage Node Name: FNAS
    • IP Address: 192.168.56.240
    • Is Master Node: As you want.
    • Group: As you want.
    • Image Path: /mnt/Volume1/data/images
    • User/Pass: Free/Free (Not very secure ;) )
  2. Image Management
    • For your image, choose the storage group witch contains the new storage node.

FreeNAS

  1. Add Volume1
    • Storage -> ZFS Volume Manager:
    • Volume Name: Volume1
    • Volume layout: All the disk (in my case)
  2. Create the path
    • Clic on Volume1 -> Create ZFS Dataset:
    • Dataset Name: data
    • Compression level: inherit
    • Enable atime: inherit
    • ZFS Deduplication: inherit
    • Clic on data -> Create ZFS Dataset:
    • Dataset Name: images
    • Compression level: inherit
    • Enable atime: inherit
    • ZFS Deduplication: inherit
    • Clic on images -> Create ZFS Dataset:
    • Dataset Name: dev
    • Compression level: inherit
    • Enable atime: inherit
    • ZFS Deduplication: inherit
    • FreeNAS DirectoryStructure.png
  3. Create .mntcheck
    • On the folder "/images" and "/dev", create the file ".mntcheck"
    • CMD: touch .mntcheck
  4. Create new user
    • Account -> Users -> Add User
    • Username: Free
    • Primary Group ID: Free
    • Home Directory: /mnt/Volume1/data/images
    • Home Directory Mode: 777
    • FreeNAS User.png
  5. Permission for the path
    • Storage -> clic on data/images -> Change Permissions
    • User: Free
    • group: Free
    • Mode: 777
    • Type of ACL: Unix
    • Set Permission recursively: YES
    • Verification: cmd: ls -laR /mnt/Volume1/data/images
  6. NFS
    • Don't edit "/etc/exports". In my case, when i restart the service, the file faded. I had to WEBGui.
    • On the left.
    • Sharing -> Inux (NFS) Shares -> Add Unix (NFS) Share.
    • Comment:...
    • Authorized networks: 192.168.56.0/24
    • All directories: OK
    • Maproot User: Free
    • Maproot Group: Free
    • Path: /mnt/Volume1/data/images
    • OK.
    • FreeNAS NFS.png
    • Idem for the folder "/dev"
    • FreeNAS dev.png
    • Verification:
    • cmd: cat /etc/exports
    • FreeNAS Exports.png
  7. FTP (I don't know if it's really necessary)
    • Services -> FTP -> Advenced Mode
    • Path: /mnt/Volume1/data/images
    • File Permission: 666
    • Directory Permission: 777

Capturing Image

  • Method 1 doesn't works with me, so i use method 2. *
  • FreeNAS FTP Will Not Rename And Move.png
  • CMD: cp -a /mnt/Volume1/data/image/dev/@MAC /mnt/Volume1/data/images/NameOfYourImage
  • cp -a to keep the same permission.


  • That's it.

Notes:

  • * Further investigation into the "FOGFTP: failed to rename file". This is most likely a permissions issue that needs to be corrected. (FOG Dev Team)