Difference between revisions of "Troubleshoot Downloading - Unicast"
(Created page with "Article under construction. Below, you will find notes / jibberish that I'm collecting to make into an article.") |
|||
| Line 1: | Line 1: | ||
Article under construction. Below, you will find notes / jibberish that I'm collecting to make into an article. | Article under construction. Below, you will find notes / jibberish that I'm collecting to make into an article. | ||
| + | |||
| + | |||
| + | |||
| + | = Common Problems = | ||
| + | |||
| + | == Task is completed, computer will now restart == | ||
| + | |||
| + | You receive the below error when deploying an image. This is ''normally'' caused by a non-resizable image that has been deployed to a host with a hard drive that is too small to hold the image. | ||
| + | |||
| + | In order to deploy a non-resizable image, the destination HDD '''must''' be the same size or larger than the HDD the image was taken from. If the source HDD was 80GB and destination HDD is 80GB but the HDDs are different brands, it is possible that the image deployment can fail. This is because the destination HDD '''MUST''' be at least as large as the source. Even 4 sectors less, or even 16KB smaller and the image deployment '''will''' fail. | ||
| + | |||
| + | Generally, to fix this you would use the resizeable image type. | ||
| + | |||
| + | Another time you might recieve this error is if you're trying to deploy to an HDD that is a'''bsolutely blank''' - with no pre-existing partitions. In such case, you might try the fix in this thread: [https://forums.fogproject.org/topic/6117/svn-image-doesnt-push svn image doesnt push] | ||
| + | |||
| + | |||
| + | [[File:Image Too Big For Destination Drive.jpg]] | ||
Revision as of 03:42, 26 November 2015
Article under construction. Below, you will find notes / jibberish that I'm collecting to make into an article.
Common Problems
Task is completed, computer will now restart
You receive the below error when deploying an image. This is normally caused by a non-resizable image that has been deployed to a host with a hard drive that is too small to hold the image.
In order to deploy a non-resizable image, the destination HDD must be the same size or larger than the HDD the image was taken from. If the source HDD was 80GB and destination HDD is 80GB but the HDDs are different brands, it is possible that the image deployment can fail. This is because the destination HDD MUST be at least as large as the source. Even 4 sectors less, or even 16KB smaller and the image deployment will fail.
Generally, to fix this you would use the resizeable image type.
Another time you might recieve this error is if you're trying to deploy to an HDD that is absolutely blank - with no pre-existing partitions. In such case, you might try the fix in this thread: svn image doesnt push
